Plan 9
E820: 00000000 0009f400 memory
E820: 0009f400 000a0000 reserved
E820: 000f0000 00100000 reserved
E820: 00100000 1fffe000 memory
E820: 1fffe000 20000000 reserved
E820: fffc0000 100000000 reserved
cpu0:  3200MHz GenuineIntel PentiumII (cpuid: AX 0x0633 DX 0x781ABF9)
ELCR: 0C00
#l0: igbe: 1Gbps port 0xFEBA0000 irq 11: 525400123456
512M memory: 89M kernel data, 423M user, 1048M swap
usbinit.../boot/usbd: /dev/usb: no hubs
no /srv/usb...kbmap...bind / /...time...
init...service: cpu...bind # trees...plan9rc...
ROOTLESS PLAN 9 NAMESPACE LAUNCHER
paqfs...bin: Wed Feb  6 05:59:29 GMT 2013
fingerprint: 835063a9b486bfeac6c935f6c10a0c32cda827df
cpu factotum...
ramsetup ramskel...
ramfs -S ramboot...tar xf /boot/skel.tar...dossrv: serving #s/dos
tar xzf tools.tgz...partial root built
no sysname found in dev or env setting to helix
root is from (tcp,local)[local!#S/sdC0/fossil]: tcp
* fs =  : accept, new value, 'clear', or 'rc' :
192.168.1.124
* auth =  : accept, new value, 'clear', or 'rc' :
192.168.1.120
ipconfig
srv 192.168.1.125 to /srv/boot...
post...
INITSKEL minimal setup for rootless plan 9 environment
binddevs...mntgen...hubfs...creating hubfs /srv/hubfs
listen1 17060 cpu 17027 exportfs rexexec...
mounting /srv/boot to /root and starting cpurc
storing startup configuration to ramdisk in /usr/bootes/tmp/p9cfg
starting mntgen and shell in current namespace
% mv /srv/boot /srv/tcpboot
% interactive=yes
% plan9rc
ROOTLESS PLAN 9 NAMESPACE LAUNCHER
paqfs...bin: Wed Feb  6 05:59:29 GMT 2013
fingerprint: 835063a9b486bfeac6c935f6c10a0c32cda827df
paqfs: create #s/bootpaq: '#s/bootpaq' srv file already exists
Interactive Startup - enter to continue to options or type rc for a shell

Internet config DHCP by default. Enter ipconfig parameters if needed
* ipparams =  : accept, new value, 'clear', or 'rc' :

Choose factotum mode - cpu terminal or debug.
* factotum = cpu : accept, new value, 'clear', or 'rc' :
clear
no factotum
* sysname = helix : accept, new value, 'clear', or 'rc' :

Skeleton fs required for mountpoints. Default ramskel recommended.
* ramsetup = ramskel : accept, new value, 'clear', or 'rc' :
clear
Load optional tools from 9fat? Enter tools.tgz or other if desired
* tgzfs = tools.tgz : accept, new value, 'clear', or 'rc' :
clear
no ramsetup
Start local Venti? Enter yes if so.
* startventi =  : accept, new value, 'clear', or 'rc' :

Attach to a file server? Choose local or tcp or leave blank for none.
* getrootfs = local : accept, new value, 'clear', or 'rc' :

Dial a venti server? Enter a dialstring or ip if so.
* venti =  : accept, new value, 'clear', or 'rc' :

parsed fossil bootpartition as  /dev/sdC0/fossil  enter new value if this is incorrect
* bootpartition = /dev/sdC0/fossil : accept, new value, 'clear', or 'rc' :

starting fossil from /dev/sdC0/fossil...
Create cpu server namespace on a port of your choice? Initskel if so.
* initscript = initskel : accept, new value, 'clear', or 'rc' :
clear
Start cpurc termrc from the file server? Enter cpu or terminal if so.
* rootstart = cpu : accept, new value, 'clear', or 'rc' :
terminal
mounting /srv/boot to /root and starting termrc
mntgen: postfd slashn: '/srv/slashn' srv file already exists
upas/fs: opening /mail/box/bootes/mbox: '/mail/box/bootes/mbox' does not exist
mount: can't open /srv/upasfs.bootes: '/srv/upasfs.bootes' file does not exist