#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.12.1 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-shared build shared libraries [default=no]" ac_help="$ac_help --enable-static build static libraries [default=yes]" ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" ac_help="$ac_help --without-mktexmf-default do not run mktexmf if MF source missing" ac_help="$ac_help --without-mktexpk-default do not run mktexpk if PK font missing" ac_help="$ac_help --without-mktextfm-default do not run mktextfm if TFM file missing" ac_help="$ac_help --without-mkocp-default do not run mkocp if OCP file missing" ac_help="$ac_help --without-mkofm-default do not run mkofm if OFM file missing" ac_help="$ac_help --enable-multiplatform put executables in bin/PLATFORM" ac_help="$ac_help --without-omega don't compile and install Omega" ac_help="$ac_help --without-pdftex don't compile and install PDFTeX" ac_help="$ac_help --with-etex=ETEX ETEX=no don't compile and install e-TeX ETEX=tex install e-TeX as tex" ac_help="$ac_help --with-system-zlib use installed zlib library" ac_help="$ac_help --with-system-pnglib use installed pnglib library" ac_help="$ac_help --with-mktextex-default run mktextex if TeX source missing" ac_help="$ac_help --with-editor=CMD invoke CMD from the e option [vi +%d %s]" ac_help="$ac_help --enable-ipc enable TeX's --ipc option, i.e., pipe to a program" ac_help="$ac_help --enable-auto-core cause TeX&MF to dump core given a certain filename" ac_help="$ac_help --disable-dump-share make fmt/base/mem files architecture-dependent" ac_help="$ac_help --with-epsfwin include EPSF pseudo-window support" ac_help="$ac_help --with-hp2627win include HP 2627 window support in Metafont" ac_help="$ac_help --with-mftalkwin include mftalk (generic server) window support" ac_help="$ac_help --with-nextwin include NeXT window support" ac_help="$ac_help --with-regiswin include Regis window support" ac_help="$ac_help --with-suntoolswin include old Suntools window support (this is not X)" ac_help="$ac_help --with-tektronixwin include Tektronix window support" ac_help="$ac_help --with-unitermwin include Uniterm window support" ac_help="$ac_help --with-x use the X Window System" ac_help="$ac_help --with-x-toolkit=KIT use a toolkit (KIT=no/yes/xt/athena)" ac_help="$ac_help --with-x11win same as --with-x" ac_help="$ac_help --with-x11 same as --with-x" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.12.1" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo '#include ' > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=web2c/main.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 && (ls -l conftest | grep x) >/dev/null 2>&1' cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi WEB2CVERSION=7.2 cat >> confdefs.h <&6 echo "configure:602: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:632: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ac_prog_rejected=no if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:681: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 && (ls -l conftest | grep x) >/dev/null 2>&1' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:715: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:720: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:744: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then CFLAGS="-g -O2" else CFLAGS="-O2" fi else GCC= test "${CFLAGS+set}" = set || CFLAGS="-g" fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then case $ac_dir in /*|[A-z]:/*) ac_aux_dir=$ac_dir;; *) ac_aux_dir=`pwd`/$ac_dir;; esac ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then case $ac_dir in /*|[A-z]:/*) ac_aux_dir=$ac_dir;; *) ac_aux_dir=`pwd`/$ac_dir;; esac ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:807: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. for ac_prog in ginstall installbsd scoinst install; do if test $ac_x $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. # OSF/1 installbsd also uses dspmsg, but is usable. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo "configure:858: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata # MS-DOS is a special case, because it sort of pretends that ln -s # works for executables. if test -z "$COMSPEC" && ln -s X conftestdata 2>/dev/null then rm -f conftestdata ac_cv_prog_LN_S="ln -s" else ac_cv_prog_LN_S=ln fi fi LN_S="$ac_cv_prog_LN_S" if test "$ac_cv_prog_LN_S" = "ln -s"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:881: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 echo "configure:913: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 echo "configure:951: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 echo "configure:992: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1034: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:1095: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1108: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:1175: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi echo $ac_n "checking whether closedir returns void""... $ac_c" 1>&6 echo "configure:1199: checking whether closedir returns void" >&5 if eval "test \"`echo '$''{'ac_cv_func_closedir_void'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_func_closedir_void=yes else cat > conftest.$ac_ext < #include <$ac_header_dirent> int closedir(); main() { exit(closedir(opendir(".")) != 0); } EOF if { (eval echo configure:1213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_func_closedir_void=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_func_closedir_void=yes fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_func_closedir_void" 1>&6 if test $ac_cv_func_closedir_void = yes; then cat >> confdefs.h <<\EOF #define CLOSEDIR_VOID 1 EOF fi for ac_hdr in assert.h float.h limits.h memory.h pwd.h stdlib.h \ string.h sys/param.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:1240: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1250: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1282: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi # Make sure we can run config.sub. if $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:1316: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`$ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`$ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 # echo $ac_n "checking for libtool object types""... $ac_c" 1>&6 echo "configure:1340: checking for libtool object types" >&5 # ## Check that the klibtool script is in ac_aux_dir. Don't bother to # scan PATH. For one thing, if we found it somewhere there, we couldn't # use that directory to put the config file ... and that's what we need # to do, to avoid having to configure in every subdirectory. LIBTOOL=$ac_aux_dir/klibtool if test ! -r $LIBTOOL; then { echo "configure: error: klibtool not in $ac_aux_dir, goodbye" 1>&2; exit 1; } exit 1 fi # ## Argument parsing: we support --enable-shared and --enable-static. # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" : else enable_shared=no fi # # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" : else enable_static=yes fi # # If they explicitly --enable-static, make that the link type. # More commonly, they will just --enable-shared; make that the link type. # If they --disable-static, implicitly --enable-shared. # In any case, prepend to any existing LIBTOOL_OBJTYPES. # If they really want to build both and link statically, # then they set LIBTOOL_OBJTYPES to SHARED and --enable-static. test "$enable_static" = yes && LIBTOOL_OBJTYPES=STATIC:$LIBTOOL_OBJTYPES (test "$enable_shared" = yes \ || test "$enable_static" = no) \ && LIBTOOL_OBJTYPES=SHARED:$LIBTOOL_OBJTYPES # Don't bother to remove the trailing :, it'll be ignored. # ## Finally: Run the klibtool configure command. LIBTOOL_OBJTYPES=$LIBTOOL_OBJTYPES RANLIB=$RANLIB \ $LIBTOOL --source-dir $ac_aux_dir --config-dir .. configure "$host" echo "$ac_t""$LIBTOOL_OBJTYPES" 1>&6 for ac_func in basename putenv strcasecmp strtol strstr do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:1392: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:1420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 LTLIBOBJS="$LTLIBOBJS $ac_func.lo" fi done for ac_func in bcopy getcwd getwd do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:1450: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:1478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for working const""... $ac_c" 1>&6 echo "configure:1504: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } ; return 0; } EOF if { (eval echo configure:1558: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_const=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_c_const" 1>&6 if test $ac_cv_c_const = no; then cat >> confdefs.h <<\EOF #define const EOF fi # Check whether prototypes work. echo $ac_n "checking whether the compiler accepts prototypes""... $ac_c" 1>&6 echo "configure:1581: checking whether the compiler accepts prototypes" >&5 if eval "test \"`echo '$''{'kb_cv_c_prototypes'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { extern void foo(int i,...); ; return 0; } EOF if { (eval echo configure:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* kb_cv_c_prototypes=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* kb_cv_c_prototypes=no fi rm -f conftest* fi echo "$ac_t""$kb_cv_c_prototypes" 1>&6 if test "$kb_cv_c_prototypes" = yes; then cat >> confdefs.h <<\EOF #define HAVE_PROTOTYPES 1 EOF fi # This is a GNU libc invention. echo $ac_n "checking whether program_invocation_name is predefined""... $ac_c" 1>&6 echo "configure:1614: checking whether program_invocation_name is predefined" >&5 if eval "test \"`echo '$''{'kb_cv_var_program_inv_name'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* kb_cv_var_program_inv_name=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* kb_cv_var_program_inv_name=no fi rm -f conftest* fi echo "$ac_t""$kb_cv_var_program_inv_name" 1>&6 if test "$kb_cv_var_program_inv_name" = yes; then cat >> confdefs.h <<\EOF #define HAVE_PROGRAM_INVOCATION_NAME 1 EOF fi # Some BSD putenv's, e.g., FreeBSD, do malloc/free's on the environment. # This test program is due to Mike Hibler . # We don't actually need to run this if we don't have putenv, but it # doesn't hurt. echo $ac_n "checking whether putenv uses malloc""... $ac_c" 1>&6 echo "configure:1650: checking whether putenv uses malloc" >&5 if eval "test \"`echo '$''{'kb_cv_func_putenv_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then kb_cv_func_putenv_malloc=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then kb_cv_func_putenv_malloc=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* kb_cv_func_putenv_malloc=no fi rm -fr conftest* fi fi echo "$ac_t""$kb_cv_func_putenv_malloc" 1>&6 if test $kb_cv_func_putenv_malloc = yes; then cat >> confdefs.h <<\EOF #define SMART_PUTENV 1 EOF fi if test $ac_cv_func_getcwd = yes; then # We only need to run this if we have getcwd. echo $ac_n "checking whether getcwd uses fork or vfork""... $ac_c" 1>&6 echo "configure:1735: checking whether getcwd uses fork or vfork" >&5 if eval "test \"`echo '$''{'kb_cv_func_getcwd_forks'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then kb_cv_func_getcwd_forks=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then kb_cv_func_getcwd_forks=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* kb_cv_func_getcwd_forks=yes fi rm -fr conftest* fi fi echo "$ac_t""$kb_cv_func_getcwd_forks" 1>&6 if test $kb_cv_func_getcwd_forks = yes; then cat >> confdefs.h <<\EOF #define GETCWD_FORKS 1 EOF fi fi # Common --with and --enable options. echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 echo "configure:1780: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 if test "x$USE_MAINTAINER_MODE" = xyes; then MAINT= else MAINT='#M#' fi # Check whether --with-mktexmf-default or --without-mktexmf-default was given. if test "${with_mktexmf_default+set}" = set; then withval="$with_mktexmf_default" : else withval=yes fi if test "x$withval" = xyes; then cat >> confdefs.h <<\EOF #define MAKE_TEX_MF_BY_DEFAULT 1 EOF fi # Check whether --with-mktexpk-default or --without-mktexpk-default was given. if test "${with_mktexpk_default+set}" = set; then withval="$with_mktexpk_default" : else withval=yes fi if test "x$withval" = xyes; then cat >> confdefs.h <<\EOF #define MAKE_TEX_PK_BY_DEFAULT 1 EOF fi # Check whether --with-mktextfm-default or --without-mktextfm-default was given. if test "${with_mktextfm_default+set}" = set; then withval="$with_mktextfm_default" : else withval=yes fi if test "x$withval" = xyes; then cat >> confdefs.h <<\EOF #define MAKE_TEX_TFM_BY_DEFAULT 1 EOF fi # Check whether --with-mkocp-default or --without-mkocp-default was given. if test "${with_mkocp_default+set}" = set; then withval="$with_mkocp_default" : else withval=yes fi if test "x$withval" = xyes; then cat >> confdefs.h <<\EOF #define MAKE_OMEGA_OCP_BY_DEFAULT 1 EOF fi # Check whether --with-mkofm-default or --without-mkofm-default was given. if test "${with_mkofm_default+set}" = set; then withval="$with_mkofm_default" : else withval=yes fi if test "x$withval" = xyes; then cat >> confdefs.h <<\EOF #define MAKE_OMEGA_OFM_BY_DEFAULT 1 EOF fi # Make sure we can run config.sub. if $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:1876: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`$ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`$ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 # Check whether --enable-multiplatform or --disable-multiplatform was given. if test "${enable_multiplatform+set}" = set; then enableval="$enable_multiplatform" if test "x$enable_multiplatform" = xyes && test "x$bindir" = 'x${exec_prefix}/bin' then bindir="$bindir/$host" fi fi echo $ac_n "checking where the main texmf tree is located""... $ac_c" 1>&6 echo "configure:1908: checking where the main texmf tree is located" >&5 texmfmain= if test "x$datadir" != 'x${prefix}/share'; then # First case, datadir is defined... eval p=\"$datadir\" if test -d "$p/texmf"; then texmfmain="$p/texmf" fi else # Second case, datadir is default... if test "x$prefix" = "xNONE"; then p="$ac_default_prefix" else eval p=\"$prefix\" fi for e in share/texmf lib/texmf texmf; do if test -d "$p/$e"; then texmfmain="$p/$e" break fi done fi texmfmain=`echo "$texmfmain" | sed 's,//*,/,g'` if test -n "$texmfmain"; then echo "$ac_t"""$texmfmain"" 1>&6 else echo "$ac_t""not found" 1>&6 echo "configure: warning: The main texmf tree was not found. Specify the location of its parent directory with the --datadir option. If you do not have the files, you can retrieve a minimal set from ftp://ftp.tug.org/tex/texmflib.tar.gz, which is mirrored on CTAN hosts in systems/web2c. Winging it by using the default location." 1>&2 texmfmain="$datadir/texmf" fi for ac_prog in 'bison -y' byacc do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1951: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$YACC"; then ac_cv_prog_YACC="$YACC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then ac_cv_prog_YACC="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi YACC="$ac_cv_prog_YACC" if test -n "$YACC"; then echo "$ac_t""$YACC" 1>&6 else echo "$ac_t""no" 1>&6 fi test -n "$YACC" && break done test -n "$YACC" || YACC="yacc" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1984: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$LEX"; then ac_cv_prog_LEX="$LEX" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then ac_cv_prog_LEX="flex" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" fi fi LEX="$ac_cv_prog_LEX" if test -n "$LEX"; then echo "$ac_t""$LEX" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$LEXLIB" then case "$LEX" in flex*) ac_lib=fl ;; *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 echo "configure:2018: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LEXLIB="-l$ac_lib" else echo "$ac_t""no" 1>&6 fi fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2062: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" if test -z "$COMSPEC"; then ac_x=-f; else ac_x=-x; fi for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test $ac_x $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi for ac_func in strerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2092: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 echo "configure:2146: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #ifdef signal #undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); #else void (*signal ()) (); #endif int main() { int i; ; return 0; } EOF if { (eval echo configure:2168: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_type_signal=int fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_signal" 1>&6 cat >> confdefs.h <&6 echo "configure:2188: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # The minimal lex program is just a single line: %%. But some broken lexes # (Solaris, I think it was) want two %% lines, so accommodate them. echo '%% %%' | $LEX if test -f lex.yy.c; then ac_cv_prog_lex_root=lex.yy elif test -f lexyy.c; then ac_cv_prog_lex_root=lexyy else { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; } fi fi echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root rm -f "${LEX_OUTPUT_ROOT}.c" echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 echo "configure:2210: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # POSIX says lex can declare yytext either as a pointer or an array; the # default is implementation-dependent. Figure out which it is, since # not all implementations provide the %pointer and %array declarations. ac_cv_prog_lex_yytext_pointer=no # Avoid need for the lex library; very commonly, -lfl won't be found by # default, and thus the link below would fail if we didn't supply yywrap, # which would fool configure into thinking that yytext was not # a char * when it really is. echo '%% %%' | $LEX echo "extern char *yytext; #ifndef yywrap int yywrap () { return 1; } #endif" >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LIBS="$ac_save_LIBS" rm -f "${LEX_OUTPUT_ROOT}.c" fi echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6 if test $ac_cv_prog_lex_yytext_pointer = yes; then cat >> confdefs.h <<\EOF #define YYTEXT_POINTER 1 EOF else echo $ac_n "checking whether yytext is an array of char""... $ac_c" 1>&6 echo "configure:2259: checking whether yytext is an array of char" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_char'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # POSIX says lex can declare yytext either as a pointer or an array; the # default is implementation-dependent. Figure out which it is, since # not all implementations provide the %pointer and %array declarations. ac_cv_prog_lex_yytext_char=no # Avoid need for the lex library; very commonly, -lfl won't be found by # default, and thus the link below would fail if we didn't supply yywrap, # which would fool configure into thinking that yytext was not # a char array when it really is. echo '%% %%' | $LEX echo "extern char yytext[]; #ifndef yywrap int yywrap () { return 1; } #endif" >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_prog_lex_yytext_char=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LIBS="$ac_save_LIBS" rm -f "${LEX_OUTPUT_ROOT}.c" fi echo "$ac_t""$ac_cv_prog_lex_yytext_char" 1>&6 if test $ac_cv_prog_lex_yytext_char = yes; then cat >> confdefs.h <<\EOF #define YYTEXT_CHAR 1 EOF else echo $ac_n "checking whether yytext is an array of unsigned char""... $ac_c" 1>&6 echo "configure:2310: checking whether yytext is an array of unsigned char" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_uchar'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # Some systems use an array of unsigned char for yytext. Figure out if that # happens to be the case. ac_cv_prog_lex_yytext_uchar=no # Avoid need for the lex library; very commonly, -lfl won't be found by # default, and thus the link below would fail if we didn't supply yywrap, # which would fool configure into thinking that yytext was not # a unsigned char array when it really is. echo '%% %%' | $LEX echo "extern unsigned char yytext[]; #ifndef yywrap int yywrap () { return 1; } #endif" >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_prog_lex_yytext_uchar=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LIBS="$ac_save_LIBS" rm -f "${LEX_OUTPUT_ROOT}.c" fi echo "$ac_t""$ac_cv_prog_lex_yytext_uchar" 1>&6 if test $ac_cv_prog_lex_yytext_uchar = yes; then cat >> confdefs.h <<\EOF #define YYTEXT_UCHAR 1 EOF fi fi fi echo $ac_n "checking whether gcc asm needs underscore""... $ac_c" 1>&6 echo "configure:2363: checking whether gcc asm needs underscore" >&5 if eval "test \"`echo '$''{'pb_cv_asm_underscore'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # Older versions of GCC asm for i386 need an underscore prepended to # external symbols. Figure out if this is so. pb_cv_asm_underscore=yes cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* pb_cv_asm_underscore=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* fi echo "$ac_t""$pb_cv_asm_underscore" 1>&6 if test "x$pb_cv_asm_underscore" = xyes; then cat >> confdefs.h <<\EOF #define ASM_NEEDS_UNDERSCORE 1 EOF fi # Needed on A/UX 3.0. I don't want to pull in other -lposix's, though. # From: bernt@weinberg.pop.bio.aau.dk (Bernt Guldbrandtsen) if test `(uname) 2>/dev/null` = aux; then echo $ac_n "checking for sigemptyset in -lposix""... $ac_c" 1>&6 echo "configure:2415: checking for sigemptyset in -lposix" >&5 ac_lib_var=`echo posix'_'sigemptyset | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo posix | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 fi fi echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6 echo "configure:2464: checking whether char is unsigned" >&5 if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$GCC" = yes; then # GCC predefines this symbol on systems where it applies. cat > conftest.$ac_ext <&5 | egrep "yes" >/dev/null 2>&1; then rm -rf conftest* ac_cv_c_char_unsigned=yes else rm -rf conftest* ac_cv_c_char_unsigned=no fi rm -f conftest* else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_char_unsigned=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_char_unsigned=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_c_char_unsigned" 1>&6 if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then cat >> confdefs.h <<\EOF #define __CHAR_UNSIGNED__ 1 EOF fi echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 echo "configure:2527: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include int main() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } EOF if { (eval echo configure:2545: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include int main() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } EOF if { (eval echo configure:2560: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_bigendian=no fi rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* if test $ac_cv_c_bigendian = unknown; then if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_bigendian=yes fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_c_bigendian" 1>&6 if test $ac_cv_c_bigendian = yes; then cat >> confdefs.h <<\EOF #define WORDS_BIGENDIAN 1 EOF fi echo $ac_n "checking size of long""... $ac_c" 1>&6 echo "configure:2617: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(long)); exit(0); } EOF if { (eval echo configure:2636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_long=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_long" 1>&6 cat >> confdefs.h <> confdefs.h <<\EOF #define MAKE_TEX_TEX_BY_DEFAULT 1 EOF fi # Check whether --with-editor or --without-editor was given. if test "${with_editor+set}" = set; then withval="$with_editor" cat >> confdefs.h <> confdefs.h <<\EOF #define IPC 1 EOF # -lsocket is needed on Solaris, at least. Maybe -lnsl on SCO, too? # See ac_path_xtra. echo $ac_n "checking for connect""... $ac_c" 1>&6 echo "configure:2736: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char connect(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_connect) || defined (__stub___connect) choke me #else connect(); #endif ; return 0; } EOF if { (eval echo configure:2764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_connect=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_connect=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test x$ac_cv_func_connect = xno; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 echo "configure:2785: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 socketlibs="-lsocket $socketlibs" else echo "$ac_t""no" 1>&6 fi fi fi # Check whether --enable-auto-core or --disable-auto-core was given. if test "${enable_auto_core+set}" = set; then enableval="$enable_auto_core" cat >> confdefs.h <<\EOF #define FUNNY_CORE_DUMP 1 EOF fi # Check whether --enable-dump-share or --disable-dump-share was given. if test "${enable_dump_share+set}" = set; then enableval="$enable_dump_share" if test "x$enableval" = xno; then cat >> confdefs.h <<\EOF #define NO_DUMP_SHARE 1 EOF fi fi # Window system support for Metafont. # Check whether --with-epsfwin or --without-epsfwin was given. if test "${with_epsfwin+set}" = set; then withval="$with_epsfwin" cat >> confdefs.h <<\EOF #define EPSFWIN 1 EOF fi # Check whether --with-hp2627win or --without-hp2627win was given. if test "${with_hp2627win+set}" = set; then withval="$with_hp2627win" cat >> confdefs.h <<\EOF #define HP2627WIN 1 EOF fi # Check whether --with-mftalkwin or --without-mftalkwin was given. if test "${with_mftalkwin+set}" = set; then withval="$with_mftalkwin" cat >> confdefs.h <<\EOF #define MFTALKWIN 1 EOF fi # Check whether --with-nextwin or --without-nextwin was given. if test "${with_nextwin+set}" = set; then withval="$with_nextwin" cat >> confdefs.h <<\EOF #define NEXTWIN 1 EOF fi # Check whether --with-regiswin or --without-regiswin was given. if test "${with_regiswin+set}" = set; then withval="$with_regiswin" cat >> confdefs.h <<\EOF #define REGISWIN 1 EOF fi # Check whether --with-suntoolswin or --without-suntoolswin was given. if test "${with_suntoolswin+set}" = set; then withval="$with_suntoolswin" wlibs="-lsuntool -lsunwindow -lpixrect $wlibs" cat >> confdefs.h <<\EOF #define SUNWIN 1 EOF fi # Check whether --with-tektronixwin or --without-tektronixwin was given. if test "${with_tektronixwin+set}" = set; then withval="$with_tektronixwin" cat >> confdefs.h <<\EOF #define TEKTRONIXWIN 1 EOF fi # Check whether --with-unitermwin or --without-unitermwin was given. if test "${with_unitermwin+set}" = set; then withval="$with_unitermwin" cat >> confdefs.h <<\EOF #define UNITERMWIN 1 EOF fi # This defines --with-x implicitly (which is why we use that package # name below), so put it here, so it comes first in the --help output. # This reads best. # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 echo "configure:2937: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then withval="$with_x" : fi # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then # Both variables are already set. have_x=yes else if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=NO ac_x_libraries=NO rm -fr conftestdir if mkdir conftestdir; then cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case "$ac_im_incroot" in /usr/include) ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. rm -fr conftestdir fi if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3004: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* # Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ /lib/usr/lib/X11 \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest* fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f conftest* fi # $ac_x_libraries = NO if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else # Record where we found X for the cache. ac_cv_have_x="have_x=yes \ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" fi fi fi eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then echo "$ac_t""$have_x" 1>&6 no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 fi if test "$no_x" = yes; then # Not all programs may use this symbol, but it does not hurt to define it. cat >> confdefs.h <<\EOF #define X_DISPLAY_MISSING 1 EOF X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= else if test -n "$x_includes"; then X_CFLAGS="$X_CFLAGS -I$x_includes" fi # It would also be nice to do this for all -L options, not just this one. if test -n "$x_libraries"; then X_LIBS="$X_LIBS -L$x_libraries" # For Solaris; some versions of Sun CC require a space after -R and # others require no space. Words are not sufficient . . . . case "`(uname -sr) 2>/dev/null`" in "SunOS 5"*) echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 echo "configure:3187: checking whether -R must be followed by a space" >&5 ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_R_nospace=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_R_nospace=no fi rm -f conftest* if test $ac_R_nospace = yes; then echo "$ac_t""no" 1>&6 X_LIBS="$X_LIBS -R$x_libraries" else LIBS="$ac_xsave_LIBS -R $x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_R_space=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_R_space=no fi rm -f conftest* if test $ac_R_space = yes; then echo "$ac_t""yes" 1>&6 X_LIBS="$X_LIBS -R $x_libraries" else echo "$ac_t""neither works" 1>&6 fi fi LIBS="$ac_xsave_LIBS" ;; "IRIX"*) X_LIBS="$X_LIBS -Wl,-rpath,$x_libraries" ;; esac fi # Check for system-dependent libraries X programs must link with. # Do this before checking for the system-independent R6 libraries # (-lICE), since we may need -lsocket or whatever for X linking. if test "$ISC" = yes; then X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" else # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X # libraries were built with DECnet support. And karl@cs.umb.edu says # the Alpha needs dnet_stub (dnet does not exist). echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 echo "configure:3256: checking for dnet_ntoa in -ldnet" >&5 ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" else echo "$ac_t""no" 1>&6 fi if test $ac_cv_lib_dnet_dnet_ntoa = no; then echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 echo "configure:3297: checking for dnet_ntoa in -ldnet_stub" >&5 ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet_stub $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" else echo "$ac_t""no" 1>&6 fi fi # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, # to get the SysV transport functions. # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4) # needs -lnsl. # The nsl library prevents programs from opening the X display # on Irix 5.2, according to dickey@clark.net. echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 echo "configure:3345: checking for gethostbyname" >&5 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char gethostbyname(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) choke me #else gethostbyname(); #endif ; return 0; } EOF if { (eval echo configure:3373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_gethostbyname=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_gethostbyname=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_gethostbyname = no; then echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 echo "configure:3394: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" else echo "$ac_t""no" 1>&6 fi fi # lieder@skyler.mavd.honeywell.com says without -lsocket, # socket/setsockopt and other routines are undefined under SCO ODT # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary # on later versions), says simon@lia.di.epfl.ch: it contains # gethostby* variants that don't use the nameserver (or something). # -lsocket must be given before -lnsl if both are needed. # We assume that if connect needs -lnsl, so does gethostbyname. echo $ac_n "checking for connect""... $ac_c" 1>&6 echo "configure:3443: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char connect(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_connect) || defined (__stub___connect) choke me #else connect(); #endif ; return 0; } EOF if { (eval echo configure:3471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_connect=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_connect=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_connect = no; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 echo "configure:3492: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" else echo "$ac_t""no" 1>&6 fi fi # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. echo $ac_n "checking for remove""... $ac_c" 1>&6 echo "configure:3535: checking for remove" >&5 if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char remove(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_remove) || defined (__stub___remove) choke me #else remove(); #endif ; return 0; } EOF if { (eval echo configure:3563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_remove=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_remove=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_remove = no; then echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 echo "configure:3584: checking for remove in -lposix" >&5 ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" else echo "$ac_t""no" 1>&6 fi fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. echo $ac_n "checking for shmat""... $ac_c" 1>&6 echo "configure:3627: checking for shmat" >&5 if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shmat(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shmat) || defined (__stub___shmat) choke me #else shmat(); #endif ; return 0; } EOF if { (eval echo configure:3655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_shmat=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_shmat=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_shmat = no; then echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 echo "configure:3676: checking for shmat in -lipc" >&5 ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lipc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" else echo "$ac_t""no" 1>&6 fi fi fi # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 echo "configure:3728: checking for IceConnectionNumber in -lICE" >&5 ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lICE $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" else echo "$ac_t""no" 1>&6 fi LDFLAGS="$ac_save_LDFLAGS" fi # Check whether --with-x-toolkit or --without-x-toolkit was given. if test "${with_x_toolkit+set}" = set; then withval="$with_x_toolkit" case "${withval}" in y | ye | yes ) val=yes ;; x | xt ) val=xt ;; n | no ) val=no ;; a | at | ath | athe | athena ) val=athena ;; * ) echo "configure: warning: unknown --with-x-toolkit argument \`$withval'; using yes." 1>&2 val=yes;; esac with_x_toolkit=$val fi # Check whether --with-x11win or --without-x11win was given. if test "${with_x11win+set}" = set; then withval="$with_x11win" with_x="$withval" fi # Check whether --with-x11 or --without-x11 was given. if test "${with_x11+set}" = set; then withval="$with_x11" with_x="$withval" fi # For Omega. if test -d $srcdir/omegadir; then test "${with_omega+set}" = set || with_omega=yes else if test "x$with_omega" = xyes; then echo "configure: warning: The Omega sources are not available." 1>&2 fi with_omega=no fi if test "x$with_omega" = xyes; then OMEGA= otpsmakefile=otps/Makefile else OMEGA='#O#' fi # For PDFTeX. if test -d $srcdir/pdftexdir; then test "${with_pdftex+set}" = set || with_pdftex=yes else if test "x$with_pdftex" = xyes; then echo "configure: warning: The PDFTeX sources are not available." 1>&2 fi with_pdftex=no fi if test "x$with_pdftex" = xyes; then PTEX= else PTEX='#P#' fi # For e-TeX, three choices: no, yes, and tex. In the latter case, we # have to comment out the normal TeX build (TEX), as well as enable the # e-TeX build (ETEX) and the replacement of TeX with e-TeX in compatibilty # mode(CTEX). if test -d $srcdir/etexdir; then test "${with_etex+set}" = set || with_etex=yes else if test "x$with_etex" = xyes || test "x$with_etex" = xtex; then echo "configure: warning: The e-TeX sources are not available." 1>&2 fi with_etex=no fi if test "x$with_etex" = xtex; then CTEX= ETEX= TEX='#T#' elif test "x$with_etex" = xyes; then CTEX='#C#' ETEX= TEX= else CTEX='#C#' ETEX='#E#' TEX= fi # --with-x* options: Distinguish no X at all, no toolkit, or toolkit. if test "x$with_x" = xyes; then if test -n "$x_libraries"; then XLFLAG="-L$x_libraries" wlibs="-lX11 $wlibs $XLFLAG" else wlibs="-lX11 $wlibs" fi if test -z "$x_ext_lib"; then # allow envvar override echo $ac_n "checking for XextCreateExtension in -lXext""... $ac_c" 1>&6 echo "configure:3879: checking for XextCreateExtension in -lXext" >&5 ac_lib_var=`echo Xext'_'XextCreateExtension | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lXext $wlibs $X_EXTRA_LIBS $XLFLAG $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 x_ext_lib=-lXext else echo "$ac_t""no" 1>&6 : fi fi if test "x$with_x_toolkit" = xno; then wfile=x11-Xlib.c else # Effectively demote --with-x-toolkit=athena to xt since # the code does not distinguish. x_tool_libs="-lXt $x_tool_libs" wfile=x11-Xt.c fi test -d window || mkdir window case "$srcdir" in /*) wfile=$srcdir/window/$wfile;; .) ;; *) wfile=../$srcdir/window/$wfile;; esac (cd window && (rm -f x11.c; $LN_S $wfile x11.c)) cat >> confdefs.h <<\EOF #define X11WIN 1 EOF fi # Don't bother with pdflib unless PDFTeX is requested. if test "$with_pdftex" = yes; then if test "$with_system_zlib" = yes; then echo $ac_n "checking for inflate in -lz""... $ac_c" 1>&6 echo "configure:3949: checking for inflate in -lz" >&5 ac_lib_var=`echo z'_'inflate | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lz $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 zlibinc=; zlib='-lz'; pdftexlibsdep= else echo "$ac_t""no" 1>&6 echo "configure: warning: Standard ZLIB library not found. Compiling my own." 1>&2 with_system_zlib=no fi if test "$with_system_zlib" = yes; then for ac_hdr in zlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:3995: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:4005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done if test "$ac_cv_header_zlib_h" != yes; then echo "configure: warning: Have not found zlib.h. Using my own zlib sources." 1>&2 with_system_zlib=no fi fi fi if test "$with_system_zlib" = no; then zlib=pdftexdir/zlib/libz.a pdftexlibsdep=pdftexdir/zlib/libz.a zlibinc='-I$(srcdir)/zlib -I$(srcdir)/../zlib' fi if test "$with_system_pnglib" = yes; then echo $ac_n "checking for png_set_read_fn in -lpng""... $ac_c" 1>&6 echo "configure:4045: checking for png_set_read_fn in -lpng" >&5 ac_lib_var=`echo png'_'png_set_read_fn | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpng -lz -lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 pnglib=-lpng else echo "$ac_t""no" 1>&6 echo "configure: warning: Standard PNG library not found. Compiling my own." 1>&2 with_system_pnglib=no fi fi if test "$with_system_pnglib" = no; then pnglib=pdftexdir/libpng/libpng.a pdftexlibsdep="$pnglib $pdftexlibsdep" fi # We always create all the makefiles. libpdfmakefile=pdftexdir/Makefile zlibmakefile=pdftexdir/zlib/Makefile pnglibmakefile=pdftexdir/libpng/Makefile fi test -d tests || mkdir tests trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.12.1" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile doc/Makefile lib/Makefile man/Makefile mpware/Makefile web2c/Makefile window/Makefile $libpdfmakefile $pnglibmakefile $zlibmakefile $otpsmakefile c-auto.h:c-auto.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@WEB2CVERSION@%$WEB2CVERSION%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@LN_S@%$LN_S%g s%@SET_MAKE@%$SET_MAKE%g s%@CPP@%$CPP%g s%@RANLIB@%$RANLIB%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@LIBTOOL@%$LIBTOOL%g s%@LTLIBOBJS@%$LTLIBOBJS%g s%@MAINT@%$MAINT%g s%@texmfmain@%$texmfmain%g s%@YACC@%$YACC%g s%@LEX@%$LEX%g s%@LEXLIB@%$LEXLIB%g s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g s%@socketlibs@%$socketlibs%g s%@X_CFLAGS@%$X_CFLAGS%g s%@X_PRE_LIBS@%$X_PRE_LIBS%g s%@X_LIBS@%$X_LIBS%g s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g s%@OMEGA@%$OMEGA%g s%@PTEX@%$PTEX%g s%@CTEX@%$CTEX%g s%@ETEX@%$ETEX%g s%@TEX@%$TEX%g s%@x_ext_lib@%$x_ext_lib%g s%@x_tool_libs@%$x_tool_libs%g s%@wlibs@%$wlibs%g s%@pnglib@%$pnglib%g s%@zlib@%$zlib%g s%@pdftexlibsdep@%$pdftexlibsdep%g s%@zlibinc@%$zlibinc%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*|[A-z]:/*) # Absolute path. srcdir="$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in "") ;; [/$]*|[A-z]:/*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"` # Replace lines of the form ac_include foo with the contents of foo: # first, from the ac_include lines construct a list of file names. # From that list, we construct a second list of those files that exist. # Then we construct lists of sed commands for including those files, # and a sed command that removes the ac_include lines. We don't attempt # to read non-existent files because some (buggy) versions of sed choke # on this. Have to use sed because old (Ultrix, SunOS) awk does not support # getline or system. (Anyway, configure scripts aren't supposed to use awk.) # Can't use only one -e and commands {dr foo} because foo has to be last. # Be careful, because the filename may contain /. Be careful with # whitespace; we need to use echo. # # No support for the multiple-output file :-separated stuff. # file_substs=`sed -n \ '/^ac_include/s%ac_include[ ]*\(.*\)%\1%p' \ "$ac_given_srcdir/$ac_file_in"` # Create the sed command line ... file_subst_cmd='sed' for ac_inc in $file_substs; do if test -f "$ac_given_srcdir/$ac_inc"; then ac_mung=`echo $ac_inc | sed 's,/,%,g'` file_subst_cmd="$file_subst_cmd -e '/^ac_include $ac_mung$/r $ac_inc'" fi done file_subst_cmd="$file_subst_cmd -e '/^ac_include/d'" # ... and fix the whitespace and escaped slashes. file_subst_cmd=`echo "$file_subst_cmd" | sed -e 's,%,\\\/,g' \ -e 's/ac_include /ac_include[ ]*/g'` # cd into the srcdir because the files being included more or less # must be part of the distribution. I can't find any way to do # variable substitution in the sed commands (so the user could have, # e.g., $top_srcdir in their ac_include line). (cd $ac_given_srcdir && eval $file_subst_cmd $ac_file_in) \ | sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ].*$%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 date >stamp-auto