/* help.h: help messages for web2c programs. This is included by everyone, from cpascal.h. This is better than putting the help messages directly in the change files because (1) multiline strings aren't supported by tangle, and it would be a pain to make up a new syntax for them in web2c, and (2) when a help msg changes, we need only recompile, not retangle or reconvert. The downside is that everything gets recompiled when any msg changes, but that's better than having umpteen separate tiny files. (For one thing, the messages have a lot in common, so it's nice to have them in one place.) Copyright (C) 1995, 96 Karl Berry. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef HELP_H #define HELP_H #ifdef BIBTEX #define BIBTEXHELP \ "Usage: bibtex [OPTION]... AUXFILE[.aux]\n\ Write bibliography for entries in AUXFILE to AUXFILE.bbl.\n\ \n\ -min-crossrefs=NUMBER include item after NUMBER cross-refs; default 2\n\ -terse do not print progress reports\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* BIBTEX */ #ifdef DVICOPY #define DVICOPYHELP \ "Usage: dvicopy [OPTION]... [INDVI[.dvi] [OUTDVI[.dvi]]]\n\ Expand virtual font references in INDVI to OUTDVI.\n\ Defaults are standard input and standard output, respectively.\n\ \n\ -magnification=NUMBER override existing magnification with NUMBER\n\ -max-pages=NUMBER process NUMBER pages; default one million\n\ -page-start=PAGE-SPEC start at PAGE-SPEC, for example `2' or `5.*.-2'\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* DVICOPY */ #ifdef DVITOMP #define DVITOMPHELP \ "Usage: dvitomp [OPTION]... DVIFILE[.dvi] [MPXFILE[.mpx]]\n\ Translate DVIFILE to the MetaPost MPXFILE.\n\ Default MPXFILE is basename of DVIFILE extended with `.mpx'.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* DVITOMP */ #ifdef DVITYPE #define DVITYPEHELP \ "Usage: dvitype [OPTION]... DVIFILE[.dvi]\n\ Verify and translate DVIFILE to human-readable form,\n\ written to standard output.\n\ \n\ -dpi=REAL set resolution to REAL pixels per inch; default 300.0\n\ -magnification=NUMBER override existing magnification with NUMBER\n\ -max-pages=NUMBER process NUMBER pages; default one million\n\ -output-level=NUMBER verbosity level, from 0 to 4; default 4\n\ -page-start=PAGE-SPEC start at PAGE-SPEC, for example `2' or `5.*.-2'\n\ -show-opcodes show numeric opcodes (in decimal)\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* DVITYPE */ #ifdef eTeX #define ETEXHELP \ "Usage: etex [OPTION]... [TEXNAME[.tex]] [COMMANDS]\n\ or: etex [OPTION]... \\FIRST-LINE\n\ or: etex [OPTION]... &FMT ARGS\n\ Run e-TeX on TEXNAME, usually creating TEXNAME.dvi.\n\ Any remaining COMMANDS are processed as e-TeX input, after TEXNAME is read.\n\ If the first line of TEXNAME is %&FMT, and FMT is an existing .efmt file,\n\ use it; %&ini means einitex. Else use `NAME.efmt', where NAME is the program\n\ invocation name, most commonly `etex'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of e-TeX input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the FMT to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -efmt=FMTNAME use FMTNAME instead of program name or a %& line\n\ -ini be einitex, for dumping formats; this is implicitly\n\ true if the program name is `einitex'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ [-no]-mktex=FMT disable/enable mktexFMT generation (FMT=tex/tfm)\n\ -mltex enable MLTeX extensions such as \\charsubdef\n\ -output-comment=STRING use STRING for DVI file comment instead of date\n\ -progname=STRING set program (and fmt) name to STRING\n\ -shell-escape enable \\write18{SHELL COMMAND}\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* eTeX */ #ifdef GFTODVI #define GFTODVIHELP \ "Usage: gftodvi [OPTION]... GFNAME\n\ Translate each character in GFNAME to a page in a DVI file,\n\ which is named with the basename of GFNAME extended with `.dvi'.\n\ \n\ -overflow-label-offset=REAL override 2.1in offset for overflow labels\n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* GFTODVI */ #ifdef GFTOPK #define GFTOPKHELP \ "Usage: gftopk [OPTION]... GFNAME [PKFILE]\n\ Translate the bitmap font GFNAME to PKFILE.\n\ Default PKFILE is basename of GFNAME extended with `pk'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* GFTOPK */ #ifdef GFTYPE #define GFTYPEHELP \ "Usage: gftype [OPTION]... GFNAME\n\ Verify and translate the bitmap font GFNAME to human-readable form,\n\ written to standard output.\n\ \n\ -images show characters as pixels\n\ -mnemonics translate all GF commands\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* GFTYPE */ #ifdef MF #define MFHELP \ "Usage: mf [OPTION]... [MFNAME[.mf]] [COMMANDS]\n\ or: mf [OPTION]... \\FIRST-LINE\n\ or: mf [OPTION]... &BASE ARGS\n\ Run Metafont on MFNAME, usually creating MFNAME.tfm and MFNAME.NNNNgf,\n\ where NNNN is the resolution of the specified mode (2602 by default).\n\ Any following COMMANDS are processed as Metafont input,\n\ after MFNAME is read.\n\ If the first line of MFNAME is %&BASE, and BASE is an existing .base file,\n\ use it; %&ini means inimf. Else use `NAME.base', where NAME is the program\n\ invocation name, most commonly `mf'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of Metafont input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the BASE to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -base=BASENAME use BASENAME instead of program name or a %& line\n\ -ini be inimf, for dumping bases; this is implicitly\n\ true if the program name is `inimf'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ [-no]-mktex=FMT disable/enable mktexFMT generation (FMT=mf)\n\ -progname=STRING set program (and base) name to STRING\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* MF */ #ifdef MFT #define MFTHELP \ "Usage: mft [OPTION]... MFNAME[.mf]\n\ Translate MFNAME to TeX for printing, using the mftmac.tex macros.\n\ Output goes to basename of MFNAME extended with `.tex'.\n\ \n\ -change=CHFILE apply the change file CHFILE as with tangle and weave\n\ -style=MFTNAME use MFTNAME instead of plain.mft\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* MFT */ #ifdef MP #define MPHELP \ "Usage: mpost [OPTION]... [MPNAME[.mp]] [COMMANDS]\n\ or: mpost [OPTION]... \\FIRST-LINE\n\ or: mpost [OPTION]... &MEM ARGS\n\ Run MetaPost on MPNAME, usually creating MPNAME.NNN (and perhaps\n\ MPNAME.tfm), where NNN are the character numbers generated.\n\ Any remaining COMMANDS are processed as MetaPost input,\n\ after MPNAME is read.\n\ If the first line of MPNAME is %&MEM, and MEM is an existing .mem file,\n\ use it; %&ini means inimp. Else use `NAME.mem', where NAME is the program\n\ invocation name, most commonly `mp'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of MetaPost input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the MEM to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -ini be inimpost, for dumping mems; this is implicitly\n\ true if the program name is `inimpost'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ -mem=MEMNAME use MEMNAME instead of program name or a %& line\n\ -progname=STRING set program (and mem) name to STRING\n\ -T, -troff set the prologues variable, use `makempx -troff'\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* MP */ #ifdef ODVICOPY #define ODVICOPYHELP \ "Usage: odvicopy [OPTION]... [INDVI[.dvi] [OUTDVI[.dvi]]]\n\ Expand virtual font references in INDVI to OUTDVI.\n\ Defaults are standard input and standard output, respectively.\n\ \n\ -magnification=NUMBER override existing magnification with NUMBER\n\ -max-pages=NUMBER process NUMBER pages; default one million\n\ -page-start=PAGE-SPEC start at PAGE-SPEC, for example `2' or `5.*.-2'\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* ODVICOPY */ #ifdef ODVITYPE #define ODVITYPEHELP \ "Usage: odvitype [OPTION]... DVIFILE[.dvi]\n\ Verify and translate DVIFILE to human-readable form,\n\ written to standard output.\n\ \n\ -dpi=REAL set resolution to REAL pixels per inch; default 300.0\n\ -magnification=NUMBER override existing magnification with NUMBER\n\ -max-pages=NUMBER process NUMBER pages; default one million\n\ -output-level=NUMBER verbosity level, from 0 to 4; default 4\n\ -page-start=PAGE-SPEC start at PAGE-SPEC, for example `2' or `5.*.-2'\n\ -show-opcodes show numeric opcodes (in decimal)\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* ODVITYPE */ #ifdef OFM2OPL #define OFM2OPLHELP \ "Usage: ofm2opl [OPTION]... OFMNAME[.ofm] [OPLFILE[.opl]]\n\ Translate the font metrics OFMNAME to human-readable property list file\n\ OPLFILE or standard output.\n\ \n\ -charcode-format=TYPE output character codes according to TYPE,\n\ either `hex' or `ascii'; default is hex,\n\ ascii = ascii letters and digits, hex for all else\n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* OFM2OPL */ #ifdef Omega #define OMEGAHELP \ "Usage: omega [OPTION]... [TEXNAME[.tex]] [COMMANDS]\n\ or: omega [OPTION]... \\FIRST-LINE\n\ or: omega [OPTION]... &FMT ARGS\n\ Run Omega on TEXNAME, usually creating TEXNAME.dvi.\n\ Any remaining COMMANDS are processed as Omega input, after TEXNAME is read.\n\ If the first line of TEXNAME is %&FMT, and FMT is an existing .fmt file,\n\ use it; %&ini means iniomega. Else use `NAME.fmt', where NAME is the\n\ program invocation name, most commonly `omega'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of Omega input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the FMT to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -fmt=FMTNAME use FMTNAME instead of program name or a %& line\n\ -ini be iniomega, for dumping formats; this is implicitly\n\ true if the program name is `iniomega'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ [-no]-mktex=FMT disable/enable mktexFMT generation (FMT=tex/tfm)\n\ -output-comment=STRING use STRING for DVI file comment instead of date\n\ -progname=STRING set program (and fmt) name to STRING\n\ -shell-escape enable \\write18{SHELL COMMAND}\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* Omega */ #ifdef OPL2OFM #define OPL2OFMHELP \ "Usage: opl2ofm [OPTION]... OPLFILE[.opl] [OFMFILE[.ofm]]\n\ Translate the property list OPLFILE to OFMFILE.\n\ Default OFMFILE is basename of OPLFILE extended with `.ofm'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* OPL2OFM */ #if defined (OTANGLE) || defined (OTANGLEBOOT) #define OTANGLEHELP \ "Usage: otangle [OPTION]... WEBFILE[.web] [CHANGEFILE[.ch]]\n\ Tangle WEBFILE with CHANGEFILE into a Pascal program.\n\ Default CHANGEFILE is /dev/null;\n\ Pascal output goes to the basename of WEBFILE extended with `.p',\n\ and a string pool file, if necessary, to the same extended with `.pool'.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* OTANGLE */ #ifdef OVF2OVP #define OVF2OVPHELP \ "Usage: ovf2ovp [OPTION]... OVFNAME[.ovf] [OFMNAME[.ofm] [OVPFILE[.ovp]]]\n\ Translate OVFNAME and companion OFMNAME to human-readable\n\ virtual property list file OVPFILE or standard output.\n\ If OFMNAME is not specified, OVFNAME (with `.ovf' removed) is used.\n\ \n\ -charcode-format=TYPE output character codes according to TYPE,\n\ either `hex' or `ascii'; default is hex,\n\ ascii = ascii letters and digits, hex for all else\n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* OVF2OVP */ #ifdef OVP2OVF #define OVP2OVFHELP \ "Usage: ovp2ovf [OPTION]... OVPFILE[.ovp] [OVFFILE[.ovf] [OFMFILE[.ofm]]]\n\ Translate OVPFILE to OVFFILE and companion OFMFILE.\n\ Default OVFFILE is basename of OVPFILE extended with `.ovf'.\n\ Default OFMFILE is OVFFILE extended with `.ofm'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* OVP2OVF */ #ifdef PATGEN #define PATGENHELP \ "Usage: patgen [OPTION]... DICTIONARY PATTERNS OUTPUT TRANSLATE\n\ Generate the OUTPUT hyphenation file for use with TeX\n\ from the DICTIONARY, PATTERNS, and TRANSLATE files.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* PATGEN */ #ifdef PDFTeX #define PDFTEXHELP \ "Usage: pdftex [OPTION]... [TEXNAME[.tex]] [COMMANDS]\n\ or: pdftex [OPTION]... \\FIRST-LINE\n\ or: pdftex [OPTION]... &FMT ARGS\n\ Run PDFTeX on TEXNAME, usually creating TEXNAME.pdf.\n\ Any remaining COMMANDS are processed as PDFTeX input, after TEXNAME is read.\n\ If the first line of TEXNAME is %&FMT, and FMT is an existing .fmt file,\n\ use it; %&ini means inipdftex. Else use `NAME.fmt', where NAME is the\n\ program invocation name, most commonly `pdftex'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of PDFTeX input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the FMT to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -fmt=FMTNAME use FMTNAME instead of program name or a %& line\n\ -ini be pdfinitex, for dumping formats; this is implicitly\n\ true if the program name is `pdfinitex'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ [-no]-mktex=FMT disable/enable mktexFMT generation (FMT=tex/tfm)\n\ -output-comment=STRING use STRING for PDF file comment instead of date\n\ -progname=STRING set program (and fmt) name to STRING\n\ -shell-escape enable \\write18{SHELL COMMAND}\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* PDFTeX */ #ifdef PKTOGF #define PKTOGFHELP \ "Usage: pktogf [OPTION]... PKNAME [GFFILE]\n\ Translate the bitmap font PKNAME to GFFILE.\n\ Default GFFILE is basename of PKNAME extended with `gf'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* PKTOGF */ #ifdef PKTYPE #define PKTYPEHELP \ "Usage: pktype [OPTION]... PKNAME\n\ Verify and translate the bitmap font PKNAME to human-readable form,\n\ written to standard output.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* PKTYPE */ #ifdef PLTOTF #define PLTOTFHELP \ "Usage: pltotf [OPTION]... PLFILE[.pl] [TFMFILE[.tfm]]\n\ Translate the property list PLFILE to TFMFILE.\n\ Default TFMFILE is basename of PLFILE extended with `.tfm'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* PLTOTF */ #ifdef POOLTYPE #define POOLTYPEHELP \ "Usage: pooltype [OPTION]... POOLFILE[.pool]\n\ Display the string number of each string in POOLFILE.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* POOLTYPE */ #if defined (TANGLE) || defined (TANGLEBOOT) #define TANGLEHELP \ "Usage: tangle [OPTION]... WEBFILE[.web] [CHANGEFILE[.ch]]\n\ Tangle WEBFILE with CHANGEFILE into a Pascal program.\n\ Default CHANGEFILE is /dev/null;\n\ Pascal output goes to the basename of WEBFILE extended with `.p',\n\ and a string pool file, if necessary, to the same extended with `.pool'.\n\ \n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* TANGLE */ #ifdef TeX #define TEXHELP \ "Usage: tex [OPTION]... [TEXNAME[.tex]] [COMMANDS]\n\ or: tex [OPTION]... \\FIRST-LINE\n\ or: tex [OPTION]... &FMT ARGS\n\ Run TeX on TEXNAME, usually creating TEXNAME.dvi.\n\ Any remaining COMMANDS are processed as TeX input, after TEXNAME is read.\n\ If the first line of TEXNAME is %&FMT, and FMT is an existing .fmt file,\n\ use it; %&ini means initex. Else use `NAME.fmt', where NAME is the program\n\ invocation name, most commonly `tex'.\n\ \n\ Alternatively, if the first non-option argument begins with a backslash,\n\ interpret all non-option arguments as a line of TeX input.\n\ \n\ Alternatively, if the first non-option argument begins with a &, the\n\ next word is taken as the FMT to read, overriding all else. Any\n\ remaining arguments are processed as above.\n\ \n\ If no arguments or options are specified, prompt for input.\n\ \n\ -fmt=FMTNAME use FMTNAME instead of program name or a %& line\n\ -ini be initex, for dumping formats; this is implicitly\n\ true if the program name is `initex'\n\ -interaction=STRING set interaction mode (STRING=batchmode/nonstopmode/\n\ scrollmode/errorstopmode)\n\ -kpathsea-debug=NUMBER set path searching debugging flags according to\n\ the bits of NUMBER\n\ [-no]-mktex=FMT disable/enable mktexFMT generation (FMT=tex/tfm)\n\ -mltex enable MLTeX extensions such as \\charsubdef\n\ -output-comment=STRING use STRING for DVI file comment instead of date\n\ -progname=STRING set program (and fmt) name to STRING\n\ -shell-escape enable \\write18{SHELL COMMAND}\n\ -help display this help and exit\n\ -version output version information and exit\n" #ifdef IPC #define TEX_IPC_HELP \ "-ipc send DVI output to a socket as well as the usual\n\ output file\n\ -ipc-start as -ipc, and also start the server at the other end\n" #endif /* IPC */ #endif /* TeX */ /* TCX files are probably a bad idea. -translate-file=TCXFILE use TCXFILE for printable chars and translations\n\ */ #ifdef TFTOPL #define TFTOPLHELP \ "Usage: tftopl [OPTION]... TFMNAME[.tfm] [PLFILE[.pl]]\n\ Translate the font metrics TFMNAME to human-readable property list file\n\ PLFILE or standard output.\n\ \n\ -charcode-format=TYPE output character codes according to TYPE,\n\ either `octal' or `ascii'; default is ascii for\n\ letters and digits, octal for all else\n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* TFTOPL */ #ifdef VFTOVP #define VFTOVPHELP \ "Usage: vftovp [OPTION]... VFNAME[.vf] [TFMNAME[.tfm] [VPLFILE[.vpl]]]\n\ Translate VFNAME and companion TFMNAME to human-readable\n\ virtual property list file VPLFILE or standard output.\n\ If TFMNAME is not specified, VFNAME (with `.vf' removed) is used.\n\ \n\ -charcode-format=TYPE output character codes according to TYPE,\n\ either `octal' or `ascii'; default is ascii for\n\ letters and digits, octal for all else\n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* VFTOVP */ #ifdef VPTOVF #define VPTOVFHELP \ "Usage: vptovf [OPTION]... VPLFILE[.vpl] [VFFILE[.vf] [TFMFILE[.tfm]]]\n\ Translate VPLFILE to VFFILE and companion TFMFILE.\n\ Default VFFILE is basename of VPLFILE extended with `.vf'.\n\ Default TFMFILE is VFFILE extended with `.tfm'.\n\ \n\ -help display this help and exit\n\ -verbose display progress reports\n\ -version output version information and exit\n" #endif /* VPTOVF */ #ifdef WEAVE #define WEAVEHELP \ "Usage: weave [OPTION]... WEBFILE[.web] [CHANGEFILE[.ch]]\n\ Weave WEBFILE with CHANGEFILE into a TeX document.\n\ Default CHANGEFILE is /dev/null;\n\ TeX output goes to the basename of WEBFILE extended with `.tex'.\n\ \n\ -x omit cross-reference information\n\ -help display this help and exit\n\ -version output version information and exit\n" #endif /* WEAVE */ #endif /* not HELP_H */