#include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" /* * SMBus support for the PIIX4 */ enum { IntelVendID= 0x8086, Piix4PMID= 0x7113, /* PIIX4 power management function */ /* SMBus configuration registers (function 3) */ SMBbase= 0x90, /* 4 byte base address (bit 0 == 1, bit 3:1 == 0) */ SMBconfig= 0xd2, SMBintrselect= (7<<1), SMIenable= (0<<1), /* interrupts sent to SMI# */ IRQ9enable= (4<<1), /* interrupts sent to IRQ9 */ SMBenable= (1<<0), /* 1 enables */ /* SMBus IO space registers */ Hoststatus= 0x0, /* (writing 1 bits reset the interrupt bits) */ Failed= (1<<4), /* transaction terminated by KILL */ Bus_error= (1<<3), /* transaction collision */ Dev_error= (1<<2), /* device error interrupt */ Host_complete= (1<<1), /* host command completion interrupt */ Host_busy= (1<<0), /* */ Slavestatus= 0x1, /* (writing 1 bits reset) */ Alert_sts= (1<<5), /* someone asserted SMBALERT# */ Shdw2_sts= (1<<4), /* slave accessed shadow 2 port */ Shdw1_sts= (1<<3), /* slave accessed shadow 1 port */ Slv_sts= (1<<2), /* slave accessed shadow 1 port */ Slv_bsy= (1<<0), Hostcontrol= 0x2, Start= (1<<6), /* start execution */ Cmd_prot= (7<<2), /* command protocol mask */ Quick= (0<<2), /* address only */ Byte= (1<<2), /* address + cmd */ ByteData= (2<<2), /* address + cmd + data */ WordData= (3<<2), /* address + cmd + data + data */ Kill= (1<<1), /* abort in progress command */ Ienable= (1<<0), /* enable completion interrupts */ Hostcommand= 0x3, Hostaddress= 0x4, AddressMask= (0x7f<<1), /* target address */ Read= (1<<0), /* 1 == read, 0 == write */ Hostdata0= 0x5, Hostdata1= 0x6, Blockdata= 0x7, Slavecontrol= 0x8, Alert_en= (1<<3), /* enable inter on SMBALERT# */ Shdw2_en= (1<<2), /* enable inter on external shadow 2 access */ Shdw1_en= (1<<1), /* enable inter on external shadow 1 access */ Slv_en= (1<<0), /* enable inter on access of host ctlr slave port */ Shadowcommand= 0x9, Slaveevent= 0xa, Slavedata= 0xc, }; static struct { int rw; int cmd; int len; int proto; } proto[] = { [SMBquick] { 0, 0, 0, Quick }, [SMBsend] { 0, 1, 0, Byte }, [SMBbytewrite] { 0, 1, 1, ByteData }, [SMBwordwrite] { 0, 1, 2, WordData }, [SMBrecv] { Read, 0, 1, Byte }, [SMBbyteread] { Read, 1, 1, ByteData }, [SMBwordread] { Read, 1, 2, WordData }, }; static void transact(SMBus *s, int type, int addr, int cmd, uchar *data) { int tries, status; char err[256]; if(type < 0 || type > nelem(proto)) panic("piix4smbus: illegal transaction type %d", type); if(waserror()){ qunlock(s); nexterror(); } qlock(s); /* wait a while for the host interface to be available */ for(tries = 0; tries < 1000000; tries++){ if((inb(s->base+Hoststatus) & Host_busy) == 0) break; sched(); } if(tries >= 1000000){ /* try aborting current transaction */ outb(s->base+Hostcontrol, Kill); for(tries = 0; tries < 1000000; tries++){ if((inb(s->base+Hoststatus) & Host_busy) == 0) break; sched(); } if(tries >= 1000000){ snprint(err, sizeof(err), "SMBus jammed: %2.2ux", inb(s->base+Hoststatus)); error(err); } } /* set up for transaction */ outb(s->base+Hostaddress, (addr<<1)|proto[type].rw); if(proto[type].cmd) outb(s->base+Hostcommand, cmd); if(proto[type].rw != Read){ switch(proto[type].len){ case 2: outb(s->base+Hostdata1, data[1]); /* fall through */ case 1: outb(s->base+Hostdata0, data[0]); break; } } /* reset the completion/error bits and start transaction */ outb(s->base+Hoststatus, Failed|Bus_error|Dev_error|Host_complete); outb(s->base+Hostcontrol, Start|proto[type].proto); /* wait for completion */ status = 0; for(tries = 0; tries < 1000000; tries++){ status = inb(s->base+Hoststatus); if(status & (Failed|Bus_error|Dev_error|Host_complete)) break; sched(); } if((status & Host_complete) == 0){ snprint(err, sizeof(err), "SMBus request failed: %2.2ux", status); error(err); } /* get results */ if(proto[type].rw == Read){ switch(proto[type].len){ case 2: data[1] = inb(s->base+Hostdata1); /* fall through */ case 1: data[0] = inb(s->base+Hostdata0); break; } } qunlock(s); poperror(); } static SMBus smbusproto = { .transact = transact, }; /* * return 0 if this is a piix4 with an smbus interface */ SMBus* piix4smbus(void) { Pcidev *p; static SMBus *s; if(s != nil) return s; p = pcimatch(nil, IntelVendID, Piix4PMID); if(p == nil) return nil; s = smalloc(sizeof(*s)); memmove(s, &smbusproto, sizeof(*s)); s->arg = p; /* disable the smbus */ pcicfgw8(p, SMBconfig, IRQ9enable|0); /* see if bios gave us a viable port space */ s->base = pcicfgr32(p, SMBbase) & ~1; print("SMB base from bios is 0x%lux\n", s->base); if(ioalloc(s->base, 0xd, 0, "piix4smbus") < 0){ s->base = ioalloc(-1, 0xd, 2, "piix4smbus"); if(s->base < 0){ free(s); print("piix4smbus: can't allocate io port\n"); return nil; } print("SMB base ialloc is 0x%lux\n", s->base); pcicfgw32(p, SMBbase, s->base|1); } /* disable SMBus interrupts, abort any transaction in progress */ outb(s->base+Hostcontrol, Kill); outb(s->base+Slavecontrol, 0); /* enable the smbus */ pcicfgw8(p, SMBconfig, IRQ9enable|SMBenable); return s; }