#include #include #include #include "pci.h" #include "vga.h" /* * S3 86C928 GUI Accelerator. */ static void snarf(Vga* vga, Ctlr* ctlr) { s3generic.snarf(vga, ctlr); } static void options(Vga*, Ctlr* ctlr) { ctlr->flag |= Hlinear|Henhanced|Foptions; } static void init(Vga* vga, Ctlr* ctlr) { Mode *mode; ulong x; /* * s3generic.init() will perform the same test. * We need to do it here too so that the Crt registers * will be correct when s3generic.init() calculates * the overflow bits. */ if(vga->mode->z > 8) error("depth %d not supported\n", vga->mode->z); mode = vga->mode; if((ctlr->flag & Henhanced) && mode->x >= 1024 && mode->z == 8){ resyncinit(vga, ctlr, Uenhanced, 0); vga->crt[0x00] = ((mode->ht/4)>>3)-5; vga->crt[0x01] = ((mode->x/4)>>3)-1; vga->crt[0x02] = ((mode->shb/4)>>3)-1; x = (mode->ehb/4)>>3; vga->crt[0x03] = 0x80|(x & 0x1F); vga->crt[0x04] = (mode->shs/4)>>3; vga->crt[0x05] = ((mode->ehs/4)>>3) & 0x1F; if(x & 0x20) vga->crt[0x05] |= 0x80; vga->crt[0x13] = mode->x/8; if(mode->z == 1) vga->crt[0x13] /= 8; } s3generic.init(vga, ctlr); vga->crt[0x3B] = (vga->crt[0]+vga->crt[4]+1)/2; /* * Set up write-posting and read-ahead-cache. */ vga->crt[0x54] = 0xA7; if(ctlr->flag & Uenhanced){ vga->crt[0x58] |= 0x04; vga->crt[0x40] |= 0x08; } else{ vga->crt[0x58] &= ~0x04; vga->crt[0x40] &= ~0x08; } /* * Set up parallel VRAM and the external * SID enable on the 86C928 */ vga->crt[0x53] &= ~0x20; /* parallel VRAM */ vga->crt[0x55] &= ~0x48; /* external SID */ vga->crt[0x65] &= ~0x60; /* 2 86C928 E-step chip bugs */ if(ctlr->flag & Uenhanced){ if(vga->ramdac->flag & Hpvram) vga->crt[0x53] |= 0x20; if(vga->ramdac->flag & Hextsid) vga->crt[0x55] |= 0x48; vga->crt[0x65] |= 0x60; } } static void load(Vga* vga, Ctlr* ctlr) { ushort advfunc; (*s3generic.load)(vga, ctlr); vgaxo(Crtx, 0x65, vga->crt[0x65]); advfunc = 0x0000; if(ctlr->flag & Uenhanced){ if(vga->mode->x == 1024 || vga->mode->x == 800) advfunc = 0x0057; else advfunc = 0x0053; } outportw(0x4AE8, advfunc); } static void dump(Vga* vga, Ctlr* ctlr) { (*s3generic.dump)(vga, ctlr); } Ctlr s3928 = { "s3928", /* name */ snarf, /* snarf */ options, /* options */ init, /* init */ load, /* load */ dump, /* dump */ };