% Copyright (C) 1990, 2000 Aladdin Enterprises. All rights reserved. % % This software is provided AS-IS with no warranty, either express or % implied. % % This software is distributed under license and may not be copied, % modified or distributed except as expressly authorized under the terms % of the license contained in the file LICENSE in this distribution. % % For more information about licensing, please refer to % http://www.ghostscript.com/licensing/. For information on % commercial licensing, go to http://www.artifex.com/licensing/ or % contact Artifex Software, Inc., 101 Lucas Valley Road #110, % San Rafael, CA 94903, U.S.A., +1(415)492-9861. % $Id: gs_lev2.ps,v 1.38 2005/10/04 17:51:52 ray Exp $ % Initialization file for Level 2 functions. % When this is run, systemdict is still writable, % but (almost) everything defined here goes into level2dict. level2dict begin % ------ System and user parameters ------ % % User parameters must obey save/restore, and must also be maintained % per-context. We implement the former, and some of the latter, here % with PostScript code. NOTE: our implementation assumes that user % parameters change only as a result of setuserparams -- that there are % no user parameters that are ever changed dynamically by the interpreter % (although the interpreter may adjust the value presented to setuserparams) % % There are two types of user parameters: those which are actually % maintained in the interpreter, and those which exist only at the % PostScript level. We maintain the current state of both types in % a read-only local dictionary named userparams, defined in systemdict. % In a multi-context system, each context has its own copy of this % dictionary. In addition, there is a constant dictionary named % psuserparams where each key is the name of a user parameter that exists % only in PostScript and the value is a procedure to check that the value % is legal: setuserparams uses this for checking the values. % setuserparams updates userparams explicitly, in addition to setting % any user parameters in the interpreter; thus we can use userparams % to reset those parameters after a restore or a context switch. % NOTE: the name userparams is known to the interpreter, and in fact % the interpreter creates the userparams dictionary. % Check parameters that are managed at the PostScript level. /.checkparamtype { % .checkparamtype exch type eq } .bind def /.checksetparams { % % .checksetparams 2 index { % Stack: newdict opname checkdict key newvalue 3 copy 3 1 roll .knownget { exec not { pop pop pop load /typecheck signalerror } if dup type /stringtype eq { dup rcheck not { pop pop pop load /invalidaccess signalerror } if } if } { pop } ifelse pop pop } forall pop pop } .bind def % not odef, shouldn't reset stacks % currentuser/systemparams creates and returns a dictionary in the % current VM. The easiest way to make this work is to copy any composite % PostScript-level parameters to global VM. Currently we have strings % as well as arrays. For arrays, we also need to copy any contents that % are in VM. Also copying string parameters insures the contents won't % be changed. Also be careful to preserve 'executable' state. /.copyparam { % .copyparam dup type /arraytype eq { .currentglobal true .setglobal exch dup wcheck exch dup xcheck exch % original attributes dup length array exch dup { % stack: destination_array original_array original_array dup type /arraytype eq { dup 2 index ne { % avoid recursion .copyparam % recurse to handle composite array elements } { % this array self referenced, do it again (yuk!) pop 1 index % get copy of destination array } ifelse } { dup type /stringtype eq { .copyparam } if } ifelse 3 1 roll % keep arrays on top } forall pop astore exch { cvx } if % set executable state exch not { readonly } if % set readonly attribute as original exch .setglobal } if dup type /stringtype eq { dup wcheck exch % save attr for setting readonly .currentglobal true .setglobal 1 index length string exch .setglobal copy exch not { readonly } if } if } .bind def % Some user parameters are managed entirely at the PostScript level. % We take care of that here. systemdict begin /psuserparams 48 dict def /getuserparam { % getuserparam /userparams .systemvar 1 index get exch pop } odef % Fill in userparams (created by the interpreter) with current values. mark .currentuserparams counttomark 2 idiv { userparams 3 1 roll put } repeat pop /.definepsuserparam { % .definepsuserparam - psuserparams 3 copy pop type cvlit /.checkparamtype cvx 2 packedarray cvx put userparams 3 1 roll put } .bind def end /currentuserparams { % - currentuserparams /userparams .systemvar dup length dict .copydict } odef /setuserparams { % setuserparams - % Check that we will be able to set the PostScript-level % user parameters. /setuserparams /psuserparams .systemvar .checksetparams % Set the C-level user params. If this succeeds, we know that % the password check succeeded. dup .setuserparams % Now set the PostScript-level params. % The interpreter may have adjusted the values of some of the % parameters, so we have to read them back. dup { /userparams .systemvar 2 index known { psuserparams 2 index known not { pop dup .getuserparam } if .copyparam % special protection for the security related parameters [ /PermitFileReading /PermitFileWriting /PermitFileControl ] { 2 index eq { % force all strings to readonly but make sure the % array is in the correct VM space (local/global). currentglobal exch dup gcheck setglobal dup length array exch { readonly exch } forall astore exch setglobal } if } forall % protect top level of parameters that we copied dup type dup /arraytype eq exch /stringtype eq or { readonly } if /userparams .systemvar 3 1 roll .forceput % userparams is read-only } { pop pop } ifelse } forall % A context switch might have occurred during the above loop, % causing the interpreter-level parameters to be reset. % Set them again to the new values. From here on, we are safe, % since a context switch will consult userparams. .setuserparams } .bind odef % Initialize user parameters managed here. /JobName () .definepsuserparam % Restore must restore the user parameters. % (Since userparams is in local VM, save takes care of saving them.) /restore { % restore - //restore /userparams .systemvar .setuserparams } .bind odef % The pssystemparams dictionary holds some system parameters that % are managed entirely at the PostScript level. systemdict begin currentdict /pssystemparams known not { /pssystemparams 40 dict readonly def } if /getsystemparam { % getsystemparam //pssystemparams 1 index .knownget { exch pop } { .getsystemparam } ifelse } odef end /currentsystemparams { % - currentsystemparams mark .currentsystemparams //pssystemparams { } forall .dicttomark } odef /setsystemparams { % setsystemparams - % Check that we will be able to set the PostScript-level % system parameters. /SAFETY .systemvar /safe get { % SAFER mode disallows some changes [ /GenericResourceDir /FontResourceDir /GenericResourcePathSep ] { 2 copy .knownget { exch //pssystemparams exch .knownget { ne { /setsystemparams /invalidaccess signalerror } if } { pop } ifelse } { pop } ifelse } forall } if /setsystemparams //pssystemparams mark exch { type cvlit /.checkparamtype cvx 2 packedarray cvx } forall .dicttomark .checksetparams % Set the C-level system params. If this succeeds, we know that % the password check succeeded. dup .setsystemparams % Now set the PostScript-level params. We must copy local strings % into global VM. dup { //pssystemparams 2 index known { % Stack: key newvalue .copyparam % protect top level parameters that we copied dup type dup /arraytype eq exch /stringtype eq or { readonly } if //pssystemparams 3 1 roll .forceput % pssystemparams is read-only } { pop pop } ifelse } forall pop } .bind odef % Initialize the passwords. % NOTE: the names StartJobPassword and SystemParamsPassword are known to % the interpreter, and must be bound to noaccess strings. % The length of these strings must be max_password (iutil2.h) + 1. /StartJobPassword 65 string noaccess def /SystemParamsPassword 65 string noaccess def % Redefine cache parameter setting to interact properly with userparams. /setcachelimit { mark /MaxFontItem 2 index .dicttomark setuserparams pop } .bind odef /setcacheparams { % The MaxFontCache parameter is a system parameter, which we might % not be able to set. Fortunately, this doesn't matter, because % system parameters don't have to be synchronized between this code % and the VM. counttomark 1 add copy setcacheparams currentcacheparams % mark size lower upper 3 -1 roll pop /MinFontCompress 3 1 roll /MaxFontItem exch .dicttomark setuserparams cleartomark } .bind odef % Add bogus user and system parameters to satisfy badly written PostScript % programs that incorrectly assume the existence of all the parameters % listed in Appendix C of the Red Book. Note that some of these may become % real parameters later: code near the end of gs_init.ps takes care of % removing any such parameters from ps{user,system}params. % psuserparams /MaxFormItem 100000 .definepsuserparam /MaxPatternItem 20000 .definepsuserparam /MaxScreenItem 48000 .definepsuserparam /MaxUPathItem 5000 .definepsuserparam % File Access Permission parameters .currentglobal true .setglobal /.checkFilePermitparams { type /arraytype eq { currentuserparams /LockFilePermissions get { 5 { pop } repeat /setuserparams /invalidaccess signalerror }{ % in addition to validating the value, ensure the value is read/only dup { readonly exch } forall .currentglobal exch dup gcheck .setglobal length array exch .setglobal astore readonly } ifelse } { 5 { pop } repeat /setuserparams /typecheck signalerror } ifelse true } .bind def % Initialize the File Permission access control to wide open % These will only be accessed via current/set userparams. % Values are a string containing multiple nul terminated path strings /PermitFileReading dup [ (*) ] .definepsuserparam psuserparams exch /.checkFilePermitparams load put /PermitFileWriting dup [ (*) ] .definepsuserparam psuserparams exch /.checkFilePermitparams load put /PermitFileControl dup [ (*) ] .definepsuserparam psuserparams exch /.checkFilePermitparams load put .setglobal pssystemparams begin /CurDisplayList 0 .forcedef /CurFormCache 0 .forcedef /CurOutlineCache 0 .forcedef /CurPatternCache 0 .forcedef /CurUPathCache 0 .forcedef /CurScreenStorage 0 .forcedef /CurSourceList 0 .forcedef /DoPrintErrors false .forcedef /MaxDisplayList 140000 .forcedef /MaxFormCache 100000 .forcedef /MaxOutlineCache 65000 .forcedef /MaxPatternCache 100000 .forcedef /MaxUPathCache 300000 .forcedef /MaxScreenStorage 84000 .forcedef /MaxSourceList 25000 .forcedef /RamSize 4194304 .forcedef end % Define the procedures for handling comment scanning. The names % %ProcessComment and %ProcessDSCComment are known to the interpreter. % These procedures take the file and comment string and file as operands. /.checkprocesscomment { dup null eq { pop true } { dup xcheck { type dup /arraytype eq exch /packedarraytype eq or } { pop false } ifelse } ifelse } .bind def /ProcessComment null .definepsuserparam psuserparams /ProcessComment {.checkprocesscomment} put (%ProcessComment) cvn { /ProcessComment getuserparam dup null eq { pop pop pop } { exec } ifelse } bind def /ProcessDSCComment null .definepsuserparam psuserparams /ProcessDSCComment {.checkprocesscomment} put /.loadingfont false def (%ProcessDSCComment) cvn { /ProcessDSCComment getuserparam dup null eq .loadingfont or { pop pop pop } { exec } ifelse } bind def % ------ Miscellaneous ------ % (<<) cvn % - << -mark- /mark load def (>>) cvn % -mark- ... >> /.dicttomark load def /languagelevel 2 def % When running in Level 2 mode, this interpreter is supposed to be % compatible with Adobe version 2017. /version (2017) readonly def % If binary tokens are supported by this interpreter, % set an appropriate default binary object format. /setobjectformat where { pop /RealFormat getsystemparam (IEEE) eq { 1 } { 3 } ifelse /ByteOrder getsystemparam { 1 add } if setobjectformat } if % Aldus Freehand versions 2.x check for the presence of the % setcolor operator, and if it is missing, substitute a procedure. % Unfortunately, the procedure takes different parameters from % the operator. As a result, files produced by this application % cause an error if the setcolor operator is actually defined % and 'bind' is ever used. Aldus fixed this bug in Freehand 3.0, % but there are a lot of files created by the older versions % still floating around. Therefore, at Adobe's suggestion, % we implement the following dreadful hack in the 'where' operator: % If the key is /setcolor, and % there is a dictionary named FreeHandDict, and % currentdict is that dictionary, % then "where" consults only that dictionary and not any other % dictionaries on the dictionary stack. .wheredict /setcolor { /FreeHandDict .where { /FreeHandDict get currentdict eq { pop currentdict /setcolor known { currentdict true } { false } ifelse } { .where } ifelse } { .where } ifelse } bind put % ------ Virtual memory ------ % /currentglobal % - currentglobal /currentshared load def /gcheck % gcheck /scheck load def /setglobal % setglobal - /setshared load def % We can make the global dictionaries very small, because they auto-expand. /globaldict currentdict /shareddict .knownget not { 4 dict } if def /GlobalFontDirectory SharedFontDirectory def % VMReclaim and VMThreshold are user parameters. /setvmthreshold { % setvmthreshold - mark /VMThreshold 2 index .dicttomark setuserparams pop } odef /vmreclaim { % vmreclaim - dup 0 gt { .vmreclaim } { mark /VMReclaim 2 index .dicttomark setuserparams pop } ifelse } odef -1 setvmthreshold % ------ IODevices ------ % /.getdevparams where { pop /currentdevparams { % currentdevparams .getdevparams .dicttomark } odef } if /.putdevparams where { pop /setdevparams { % setdevparams - mark 1 index { } forall counttomark 2 add index .putdevparams pop pop } odef } if % ------ Job control ------ % serverdict begin % We could protect the job information better, but we aren't attempting % (currently) to protect ourselves against maliciousness. /.jobsave null def % top-level save object /.jobsavelevel 0 def % save depth of job (0 if .jobsave is null, % 1 otherwise) /.adminjob true def % status of current unencapsulated job end % serverdict % Because there may be objects on the e-stack created since the job save, % we have to clear the e-stack before doing the end-of-job restore. % We do this by executing a 2 .stop, which is caught by the 2 .stopped % in .runexec; we leave on the o-stack a procedure to execute aftewards. % %**************** The definition of startjob is not complete yet, since % it doesn't reset stdin/stdout. /.startnewjob { % % .startnewjob - serverdict /.jobsave get dup null eq { pop } { restore } ifelse exch { % Unencapsulated job serverdict /.jobsave null put serverdict /.jobsavelevel 0 put serverdict /.adminjob 3 -1 roll 1 gt put % The Adobe documentation doesn't say what happens to the % graphics state stack in this case, but an experiment % produced results suggesting that a grestoreall occurs. grestoreall } { % Encapsulated job pop serverdict /.jobsave save put serverdict /.jobsavelevel 1 put .userdict /quit /stop load put } ifelse % Reset the interpreter state. clear cleardictstack initgraphics false setglobal 2 vmreclaim % Make sure GC'ed memory is reclaimed and freed. } bind def /.startjob { % % .startjob vmstatus pop pop serverdict /.jobsavelevel get eq 2 index .checkpassword 0 gt and { exch .checkpassword exch count 3 roll count 3 sub { pop } repeat cleardictstack % Reset the e-stack back to the 2 .stopped in .runexec, % passing the finish_proc to be executed afterwards. 2 .stop } { % Password check failed pop pop pop false } ifelse } odef /startjob { % startjob % This is a hack. We really need some way to indicate explicitly % to the interpreter that we are under control of a job server. { .startnewjob true } .startjob } odef % The procedure to undo the job encapsulation /.endjob { clear cleardictstack serverdict /.jobsave get dup null eq { pop } { restore } ifelse serverdict /.jobsave null put 2 vmreclaim % recover local and global VM } odef systemdict begin /quit { % - quit - //systemdict begin serverdict /.jobsave get null eq { end //quit } { /quit load /invalidaccess /signalerror load end exec } ifelse } bind odef end % We would like to define exitserver as a procedure, using the code % that the Red Book says is equivalent to it. However, since startjob % resets the exec stack, we can't do this, because control would never % proceed past the call on startjob if the exitserver is successful. % Instead, we need to construct exitserver out of pieces of startjob. serverdict begin /exitserver { % exitserver - true exch { .startnewjob } .startjob not { /exitserver /invalidaccess signalerror } if } bind def end % serverdict % ------ Compatibility ------ % % In Level 2 mode, the following replace the definitions that gs_statd.ps % installs in statusdict and serverdict. % Note that statusdict must be allocated in local VM. % We don't bother with many of these yet. /.dict1 { exch mark 3 1 roll .dicttomark } bind def currentglobal false setglobal 25 dict exch setglobal begin currentsystemparams % The following do not depend on the presence of setpagedevice. /buildtime 1 index /BuildTime get def % Also define /buildtime in systemdict because Adobe does so and some fonts use it as ID systemdict /buildtime dup load put /byteorder 1 index /ByteOrder get def /checkpassword { .checkpassword 0 gt } bind def dup /DoStartPage known { /dostartpage { /DoStartPage getsystemparam } bind def /setdostartpage { /DoStartPage .dict1 setsystemparams } bind def } if dup /StartupMode known { /dosysstart { /StartupMode getsystemparam 0 ne } bind def /setdosysstart { { 1 } { 0 } ifelse /StartupMode .dict1 setsystemparams } bind def } if %****** Setting jobname is supposed to set userparams.JobName, too. /jobname { /JobName getuserparam } bind def /jobtimeout { /JobTimeout getuserparam } bind def /ramsize { /RamSize getsystemparam } bind def /realformat 1 index /RealFormat get def dup /PrinterName known { /setprintername { /PrinterName .dict1 setsystemparams } bind def } if /printername { currentsystemparams /PrinterName .knownget not { () } if exch copy } bind def currentuserparams /WaitTimeout known { /waittimeout { /WaitTimeout getuserparam } bind def } if % The following do require setpagedevice. /.setpagedevice where { pop } { (%END PAGEDEVICE) .skipeof } ifelse /defaulttimeouts { currentsystemparams dup /JobTimeout .knownget not { 0 } if exch /WaitTimeout .knownget not { 0 } if currentpagedevice /ManualFeedTimeout .knownget not { 0 } if } bind def /margins { currentpagedevice /Margins .knownget { exch } { [0 0] } ifelse } bind def /pagemargin { currentpagedevice /PageOffset .knownget { 0 get } { 0 } ifelse } bind def /pageparams { currentpagedevice dup /Orientation .knownget { 1 and ORIENT1 { 1 xor } if } { 0 } ifelse exch dup /PageSize get aload pop 3 index 0 ne { exch } if 3 2 roll /PageOffset .knownget { 0 get } { 0 } ifelse 4 -1 roll } bind def /setdefaulttimeouts { exch mark /ManualFeedTimeout 3 -1 roll /Policies mark /ManualFeedTimeout 1 .dicttomark .dicttomark setpagedevice /WaitTimeout exch mark /JobTimeout 5 2 roll .dicttomark setsystemparams } bind def /.setpagesize { 2 array astore /PageSize .dict1 setpagedevice } bind def /setduplexmode { /Duplex .dict1 setpagedevice } bind def /setmargins { exch 2 array astore /Margins .dict1 setpagedevice } bind def /setpagemargin { 0 2 array astore /PageOffset .dict1 setpagedevice } bind def /setpageparams { mark /PageSize 6 -2 roll 4 index 1 and ORIENT1 { 1 } { 0 } ifelse ne { exch } if 2 array astore /Orientation 5 -1 roll ORIENT1 { 1 xor } if /PageOffset counttomark 2 add -1 roll 0 2 array astore .dicttomark setpagedevice } bind def /setresolution { dup 2 array astore /HWResolution .dict1 setpagedevice } bind def %END PAGEDEVICE % The following are not implemented yet. %manualfeed %manualfeedtimeout %pagecount %pagestackorder %setpagestackorder pop % currentsystemparams % Flag the current dictionary so it will be swapped when we % change language levels. (See zmisc2.c for more information.) /statusdict currentdict def currentdict end /statusdict exch .forcedef % statusdict is local, systemdict is global % The following compatibility operators are in systemdict. They are % defined here, rather than in gs_init.ps, because they require the % resource machinery. /devforall { % devforall - exch { 1 index currentdevparams /Type .knownget { /FileSystem eq } { false } ifelse { exec } { pop pop } ifelse } /exec load 3 packedarray cvx exch (*) 3 1 roll /IODevice resourceforall } odef /devstatus { % <(%disk*%)> devstatus % % true % devstatus false dup length 5 ge { dup 0 5 getinterval (%disk) eq { dup /IODevice resourcestatus { pop pop dup currentdevparams dup /Searchable get exch dup /Writeable get exch dup /HasNames get exch dup /Mounted get exch dup /Removable get exch dup /SearchOrder get exch dup /Free get exch /LogicalSize get 9 -1 roll pop true } { pop false } ifelse } { pop false } ifelse } { pop false } ifelse } odef % ------ Color spaces ------ % % Move setcolorsapce, setcolor, and colorspacedict to level2dict level2dict /setcolorspace .cspace_util 1 index get put level2dict /setcolor .cspace_util 1 index get put level2dict /colorspacedict .cspace_util 1 index get put % Add the level 2 color spaces % DevicePixel is actually a LanguageLevel 3 feature; it is here for % historical reasons. %% Replace 1 (gs_devpxl.ps) (gs_devpxl.ps) runlibfile %% Replace 1 (gs_ciecs2.ps) (gs_ciecs2.ps) runlibfile %% Replace 1 (gs_indxd.ps) (gs_indxd.ps) runlibfile %% Replace 1 (gs_sepr.ps) (gs_sepr.ps) runlibfile %% Replace 1 (gs_patrn.ps) (gs_patrn.ps) runlibfile % ------ CIE color rendering ------ % % Define findcolorrendering and a default ColorRendering ProcSet. /findcolorrendering { % findcolorrendering % /ColorRendering /ProcSet findresource 1 index .namestring (.) concatstrings 1 index /GetPageDeviceName get exec .namestring (.) concatstrings 2 index /GetHalftoneName get exec .namestring concatstrings concatstrings dup /ColorRendering resourcestatus { pop pop exch pop exch pop true } { pop /GetSubstituteCRD get exec false } ifelse } odef 5 dict dup begin /GetPageDeviceName { % - GetPageDeviceName currentpagedevice dup /PageDeviceName .knownget { exch pop dup null eq { pop /none } if } { pop /none } ifelse } bind def /GetHalftoneName { % - GetHalftoneName currenthalftone /HalftoneName .knownget not { /none } if } bind def /GetSubstituteCRD { % GetSubstituteCRD pop /DefaultColorRendering } bind def end % The resource machinery hasn't been activated, so just save the ProcSet % and let .fixresources finish the installation process. /ColorRendering exch def % Define setcolorrendering. /.colorrenderingtypes 5 dict def /setcolorrendering { % setcolorrendering - dup /ColorRenderingType get //.colorrenderingtypes exch get exec } odef /.setcolorrendering1 where { pop } { (%END CRD) .skipeof } ifelse .colorrenderingtypes 1 { dup .buildcolorrendering1 .setcolorrendering1 } .bind put % Note: the value 101 in the next line must be the same as the value of % GX_DEVICE_CRD1_TYPE in gscrdp.h. .colorrenderingtypes 101 { dup .builddevicecolorrendering1 .setdevicecolorrendering1 } .bind put % sRGB output CRD, D65 white point mark /ColorRenderingType 1 /RangePQR [ -0.5 2 -0.5 2 -0.5 2 ] readonly % Bradford Cone Space /MatrixPQR [ 0.8951 -0.7502 0.0389 0.2664 1.7135 -0.0685 -0.1614 0.0367 1.0296] readonly /MatrixLMN [ 3.240449 -0.969265 0.055643 -1.537136 1.876011 -0.204026 -0.498531 0.041556 1.057229 ] readonly % Inverse sRGB gamma transform /EncodeABC [ { dup 0.00304 le { 12.92321 mul } { 1 2.4 div exp 1.055 mul 0.055 sub } ifelse } bind dup dup ] readonly /WhitePoint [ 0.9505 1 1.0890 ] readonly % D65 /BlackPoint [ 0 0 0 ] readonly % VonKries-like transform in Bradford Cone Space /TransformPQR % The implementations have been moved to C for performance. [ { .TransformPQR_scale_WB0 } bind { .TransformPQR_scale_WB1 } bind { .TransformPQR_scale_WB2 } bind ] readonly .dicttomark setcolorrendering %END CRD % Initialize a CIEBased color space for sRGB. /CIEsRGB [ /CIEBasedABC mark /DecodeLMN [ { dup 0.03928 le { 12.92321 div } { 0.055 add 1.055 div 2.4 exp } ifelse } bind dup dup ] readonly /MatrixLMN [ 0.412457 0.212673 0.019334 0.357576 0.715152 0.119192 0.180437 0.072175 0.950301 ] readonly /WhitePoint [0.9505 1.0 1.0890] readonly .dicttomark readonly ] readonly def % ------ Painting ------ % % A straightforward definition of execform that doesn't actually % do any caching. /.execform1 { % This is a separate operator so that the stacks will be restored % properly if an error occurs. dup /Matrix get concat dup /BBox get aload pop exch 3 index sub exch 2 index sub rectclip dup /PaintProc get 1 index /Implementation known not { 1 index dup /Implementation null .forceput readonly pop } if exec } .bind odef % must bind .forceput /.formtypes 5 dict dup 1 /.execform1 load put def /execform { %
execform - gsave { dup /FormType get //.formtypes exch get exec } stopped grestore { stop } if } odef /.patterntypes 5 dict dup 1 /.buildpattern1 load put def /makepattern { % makepattern //.patterntypes 2 index /PatternType get get .currentglobal false .setglobal exch % Stack: proto matrix global buildproc 3 index dup length 1 add dict .copydict 3 index 3 -1 roll exec 3 -1 roll .setglobal 1 index /Implementation 3 -1 roll put readonly exch pop exch pop } odef /setpattern { % [ ...] setpattern - currentcolorspace 0 get /Pattern ne { [ /Pattern currentcolorspace ] setcolorspace } if setcolor } odef % The following functions emulate the actions of findcmykcustomcolor and % setcustomcolor. These functions are described in Adobe's TN 5044. That % same document also says "The following “operators” are not defined in the % PostScript Language Reference Manual, but should be used as pseudo-operators % in your PostScript language output. Separation applications from Adobe % Systems and other vendors will redefine these convention operators to % separate your documents. Your application should conditionally define % procedures with these special names, as shown later in this document." % % We are providing these functions because we have found files created by % "QuarkXPress: pictwpstops filter 1.0" which produce bad shading dictionaries % if these operators are not defined. % Conditionally disable the TN 5044 psuedo-ops if NO_TN5044 specified /NO_TN5044 where { pop (%END TN 5044 psuedo-ops) .skipeof } if % TN 5044 does not define the contents of the array. We are simply putting % the values given into an array. This is consistent with what we see when % testing with Adobe Distiller 6.0. % findcmykcustomcolor /findcmykcustomcolor { 5 array astore } bind def % Build a tint transform function for use by setcustomcolor. This function % is for a Separation color space which has a DeviceCMYK base color space % (i.e. 1 input and 4 outputs). The input to buildcustomtinttransform is the % array created by findcmykcustomcolor. The resulting function is: % { dup cyan mul exch dup magenta mul exch dup yellow mul exch black mul } % Where cyan, magenta, yellow, and black are values from the array. /buildcustomtinttransform % buildcustomtinttransform { [ /dup load 2 index 0 get /mul load /exch load /dup load 6 index 1 get /mul load /exch load /dup load 10 index 2 get /mul load /exch load 13 index 3 get /mul load ] cvx bind exch pop % Remove the input array } bind def % Set a custom color based upon a tint and array which describes the custom % color. See findcmykcustomcolor. First we create and then set a Separation % colorspace. Then we set the specified color. % Note that older Adobe ProcSets apparently allow for 'null' as the tint % for some reason, so an alternate operational mode is tolerated: % null setcustomcolor - /setcustomcolor % setcustomcolor - { dup //null ne { % Start building Separation colorspace [ /Separation 3 index 4 get % Get separation name from array's key /DeviceCMYK 5 index buildcustomtinttransform ] % build the tint transform function setcolorspace % Set the Separation color space as current setcolor % Set the tint as the current color pop % Remove the input array } { pop } % 'null' as the tint is ignored ifelse } bind def % This proc is supposed to implement a version of overprinting. TN 5044 says % that this proc is not used by any shipping host-based application. We have % only found it being used in a proc set in files by Canvas from Deneba Systems. % Even their proc set does not actually do any overprinting. However their % files crash if this is not defined. Thus we have a copy of this proc but % we are simply checking for inputs being -1 and if so then we set the value % to 0. /setcmykoverprint { 4 { dup -1 eq { pop 0 } if 4 1 roll } repeat setcmykcolor } bind def %END TN 5044 psuedo-ops end % level2dict