/* Copyright (C) 1997, 1999 Aladdin Enterprises.  All rights reserved.
  
  This software is provided AS-IS with no warranty, either express or
  implied.
  
  This software is distributed under license and may not be copied,
  modified or distributed except as expressly authorized under the terms
  of the license contained in the file LICENSE in this distribution.
  
  For more information about licensing, please refer to
  http://www.ghostscript.com/licensing/. For information on
  commercial licensing, go to http://www.artifex.com/licensing/ or
  contact Artifex Software, Inc., 101 Lucas Valley Road #110,
  San Rafael, CA  94903, U.S.A., +1(415)492-9861.
*/

/* $Id: gdevlj56.c,v 1.7 2005/07/07 16:44:17 stefan Exp $ */
/* H-P LaserJet 5 & 6 drivers for Ghostscript */
#include "gdevprn.h"
#include "stream.h"
#include "gdevpcl.h"
#include "gdevpxat.h"
#include "gdevpxen.h"
#include "gdevpxop.h"
#include "gdevpxut.h"

/* Define the default resolution. */
#ifndef X_DPI
#  define X_DPI 600
#endif
#ifndef Y_DPI
#  define Y_DPI 600
#endif

/* Define the number of blank lines that make it worthwhile to */
/* start a new image. */
#define MIN_SKIP_LINES 2

/* We round up the LINE_SIZE to a multiple of a ulong for faster scanning. */
#define W sizeof(word)

private dev_proc_open_device(ljet5_open);
private dev_proc_close_device(ljet5_close);
private dev_proc_print_page(ljet5_print_page);

private const gx_device_procs ljet5_procs =
prn_procs(ljet5_open, gdev_prn_output_page, ljet5_close);

const gx_device_printer gs_lj5mono_device =
prn_device(ljet5_procs, "lj5mono",
	   DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
	   X_DPI, Y_DPI,
	   0, 0, 0, 0,
	   1, ljet5_print_page);

private const gx_device_procs lj5gray_procs =
prn_color_procs(ljet5_open, gdev_prn_output_page, ljet5_close,
		gx_default_gray_map_rgb_color,
		gx_default_gray_map_color_rgb);

const gx_device_printer gs_lj5gray_device = {
    prn_device_body(gx_device_printer, lj5gray_procs, "lj5gray",
		    DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
		    X_DPI, Y_DPI,
		    0, 0, 0, 0,
		    1, 8, 255, 0, 256, 1, ljet5_print_page)
};

/* Open the printer, writing the stream header. */
private int
ljet5_open(gx_device * pdev)
{
    int code = gdev_prn_open(pdev);

    if (code < 0)
	return code;
    code = gdev_prn_open_printer(pdev, true);
    if (code < 0)
	return code;
    {
	gx_device_printer *const ppdev = (gx_device_printer *)pdev;
	stream fs;
	stream *const s = &fs;
	byte buf[50];		/* arbitrary */

	s_init(s, pdev->memory);
	swrite_file(s, ppdev->file, buf, sizeof(buf));
	px_write_file_header(s, pdev);
	sflush(s);		/* don't close */
    }
    return 0;
}

/* Close the printer, writing the stream trailer. */
private int
ljet5_close(gx_device * pdev)
{
    gx_device_printer *const ppdev = (gx_device_printer *)pdev;
    int code = gdev_prn_open_printer(pdev, true);

    if (code < 0)
	return code;
    px_write_file_trailer(ppdev->file);
    return gdev_prn_close(pdev);
}

/* Send the page to the printer.  For now, just send the whole image. */
private int
ljet5_print_page(gx_device_printer * pdev, FILE * prn_stream)
{
    gs_memory_t *mem = pdev->memory;
    uint line_size = gdev_mem_bytes_per_scan_line((gx_device *) pdev);
    uint line_size_words = (line_size + W - 1) / W;
    uint out_size = line_size + (line_size / 127) + 1;
    word *line = (word *)gs_alloc_byte_array(mem, line_size_words, W, "ljet5(line)");
    byte *out = gs_alloc_bytes(mem, out_size, "ljet5(out)");
    int code = 0;
    int lnum;
    stream fs;
    stream *const s = &fs;
    byte buf[200];		/* arbitrary */

    if (line == 0 || out == 0) {
	code = gs_note_error(gs_error_VMerror);
	goto done;
    }
    s_init(s, mem);
    swrite_file(s, prn_stream, buf, sizeof(buf));

    /* Write the page header. */
    {
	static const byte page_header[] = {
	    pxtBeginPage,
	    DUSP(0, 0), DA(pxaPoint),
	    pxtSetCursor
	};
	static const byte mono_header[] = {
	    DUB(eGray), DA(pxaColorSpace),
	    DUB(e8Bit), DA(pxaPaletteDepth),
	    pxt_ubyte_array, pxt_ubyte, 2, 0xff, 0x00, DA(pxaPaletteData),
	    pxtSetColorSpace
	};
	static const byte gray_header[] = {
	    DUB(eGray), DA(pxaColorSpace),
	    pxtSetColorSpace
	};

	px_write_page_header(s, (gx_device *)pdev);
	px_write_select_media(s, (gx_device *)pdev, NULL, NULL);
	PX_PUT_LIT(s, page_header);
	if (pdev->color_info.depth == 1)
	    PX_PUT_LIT(s, mono_header);
	else
	    PX_PUT_LIT(s, gray_header);
    }

    /* Write the image header. */
    {
	static const byte mono_image_header[] = {
	    DA(pxaDestinationSize),
	    DUB(eIndexedPixel), DA(pxaColorMapping),
	    DUB(e1Bit), DA(pxaColorDepth),
	    pxtBeginImage
	};
	static const byte gray_image_header[] = {
	    DA(pxaDestinationSize),
	    DUB(eDirectPixel), DA(pxaColorMapping),
	    DUB(e8Bit), DA(pxaColorDepth),
	    pxtBeginImage
	};

	px_put_us(s, pdev->width);
	px_put_a(s, pxaSourceWidth);
	px_put_us(s, pdev->height);
	px_put_a(s, pxaSourceHeight);
	px_put_usp(s, pdev->width, pdev->height);
	if (pdev->color_info.depth == 1)
	    PX_PUT_LIT(s, mono_image_header);
	else
	    PX_PUT_LIT(s, gray_image_header);
    }

    /* Write the image data, compressing each line. */
    for (lnum = 0; lnum < pdev->height; ++lnum) {
	int ncompr;
	static const byte line_header[] = {
	    DA(pxaStartLine),
	    DUS(1), DA(pxaBlockHeight),
	    DUB(eRLECompression), DA(pxaCompressMode),
	    pxtReadImage
	};

	code = gdev_prn_copy_scan_lines(pdev, lnum, (byte *) line, line_size);
	if (code < 0)
	    goto fin;
	px_put_us(s, lnum);
	PX_PUT_LIT(s, line_header);
	ncompr = gdev_pcl_mode2compress_padded(line, line + line_size_words,
					       out, true);
	px_put_data_length(s, ncompr);
	px_put_bytes(s, out, ncompr);
    }

    /* Finish up. */
  fin:
    spputc(s, pxtEndImage);
    spputc(s, pxtEndPage);
    sflush(s);
  done:
    gs_free_object(mem, out, "ljet5(out)");
    gs_free_object(mem, line, "ljet5(line)");
    return code;
}