/* Copyright (C) 2002 artofcode LLC. All rights reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. For more information about licensing, please refer to http://www.ghostscript.com/licensing/. For information on commercial licensing, go to http://www.artifex.com/licensing/ or contact Artifex Software, Inc., 101 Lucas Valley Road #110, San Rafael, CA 94903, U.S.A., +1(415)492-9861. */ /* $Id: gdevperm.c,v 1.4 2004/06/18 07:00:47 dan Exp $ */ /* Device which permutes color components, for testing DeviceN. */ #include "gdevprn.h" #include "gxdcconv.h" /** * With no additional parameters, the device named "permute" looks to * Ghostscript like a standard CMYK contone device, and outputs a PPM * file, using a simple CMYK->RGB transform. This should be the * baseline for regression testing. * * With the addition of -dPermute=1, the internal behavior changes * somewhat, but in most cases the resulting rendered file should be * the same. In this mode, the color model becomes "DeviceN" rather * than "DeviceCMYK", the number of components goes to six, and the * color model is considered to be the (yellow, cyan, cyan, magenta, * 0, black) tuple. This is what's rendered into the memory * buffer. Finally, on conversion to RGB for output, the colors are * permuted back. * * As such, this code should check that all imaging code paths are * 64-bit clean. Additionally, it should find incorrect code that * assumes that the color model is one of DeviceGray, DeviceRGB, or * DeviceCMYK. **/ private dev_proc_print_page(perm_print_page); private dev_proc_get_params(perm_get_params); private dev_proc_put_params(perm_put_params); private dev_proc_get_color_mapping_procs(perm_get_color_mapping_procs); private dev_proc_get_color_comp_index(perm_get_color_comp_index); private dev_proc_encode_color(perm_encode_color); private dev_proc_decode_color(perm_decode_color); struct gx_device_perm_s { gx_device_common; gx_prn_device_common; const char **std_colorant_names; int num_std_colorant_names; /* Number of names in list */ int mode; int permute; }; typedef struct gx_device_perm_s gx_device_perm_t; private const gx_device_procs perm_procs = { gdev_prn_open, NULL, NULL, gdev_prn_output_page, gdev_prn_close, NULL, NULL, NULL, /* fill_rectangle */ NULL, /* tile_rectangle */ NULL, /* copy_mono */ NULL, /* copy_color */ NULL, /* draw_line */ NULL, /* get_bits */ perm_get_params, /* get_params */ perm_put_params, /* put_params */ NULL, /* map_cmyk_color - not used */ NULL, /* get_xfont_procs */ NULL, /* get_xfont_device */ NULL, /* map_rgb_alpha_color */ gx_page_device_get_page_device, /* get_page_device */ NULL, /* get_alpha_bits */ NULL, /* copy_alpha */ NULL, /* get_band */ NULL, /* copy_rop */ NULL, /* fill_path */ NULL, /* stroke_path */ NULL, /* fill_mask */ NULL, /* fill_trapezoid */ NULL, /* fill_parallelogram */ NULL, /* fill_triangle */ NULL, /* draw_thin_line */ NULL, /* begin_image */ NULL, /* image_data */ NULL, /* end_image */ NULL, /* strip_tile_rectangle */ NULL, /* strip_copy_rop */ NULL, /* get_clipping_box */ NULL, /* begin_typed_image */ NULL, /* get_bits_rectangle */ NULL, /* map_color_rgb_alpha */ NULL, /* create_compositor */ NULL, /* get_hardware_params */ NULL, /* text_begin */ NULL, /* finish_copydevice */ NULL, /* begin_transparency_group */ NULL, /* end_transparency_group */ NULL, /* begin_transparency_mask */ NULL, /* end_transparency_mask */ NULL, /* discard_transparency_layer */ perm_get_color_mapping_procs, /* get_color_mapping_procs */ perm_get_color_comp_index, perm_encode_color, /* encode_color */ perm_decode_color /* decode_color */ }; const gx_device_perm_t gs_perm_device = { prn_device_body_extended(gx_device_perm_t, perm_procs, "permute", DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS, 72, 72, 0, 0, 0, 0, GX_DEVICE_COLOR_MAX_COMPONENTS, 4, GX_CINFO_POLARITY_SUBTRACTIVE, 32, 0, 255, 255, 256, 256, GX_CINFO_SEP_LIN, "DeviceN", perm_print_page), NULL, 0, 0, 0 }; private int perm_print_page(gx_device_printer *pdev, FILE *pstream) { int y; gx_device_perm_t * const dev = (gx_device_perm_t *)pdev; int ncomp = dev->num_std_colorant_names; int raw_raster = pdev->width * ncomp; byte *raw_line; byte *cooked_line; byte *row; int code = 0; int mode = dev->mode; int permute = dev->permute; fprintf(pstream, "P6\n%d %d\n255\n", dev->width, dev->height); raw_line = gs_alloc_bytes(pdev->memory, raw_raster, "perm_print_page"); cooked_line = gs_alloc_bytes(pdev->memory, dev->width * 3, "perm_print_page"); for (y = 0; y < dev->height; y++) { int x; code = gdev_prn_get_bits(pdev, y, raw_line, &row); for (x = 0; x < dev->width; x++) { int c, m, y, k; int r, g, b; if (mode == 0) { if (permute) { c = row[x * ncomp + 1]; m = row[x * ncomp + 3]; y = row[x * ncomp + 0]; k = row[x * ncomp + 5]; } else { c = row[x * ncomp]; m = row[x * ncomp + 1]; y = row[x * ncomp + 2]; k = row[x * ncomp + 3]; } } else /* if (mode == 1) */ { if (permute) { c = row[x * ncomp + 1]; m = row[x * ncomp + 3]; y = row[x * ncomp + 0]; k = 0; } else { c = row[x * ncomp]; m = row[x * ncomp + 1]; y = row[x * ncomp + 2]; k = 0; } } r = (255 - c) * (255 - k) / 255; g = (255 - m) * (255 - k) / 255; b = (255 - y) * (255 - k) / 255; cooked_line[x * 3] = r; cooked_line[x * 3 + 1] = g; cooked_line[x * 3 + 2] = b; } fwrite(cooked_line, 1, dev->width * 3, pstream); } gs_free_object(pdev->memory, cooked_line, "perm_print_page"); gs_free_object(pdev->memory, raw_line, "perm_print_page"); return code; } private void perm_permute_cm(gx_device *pdev, frac out[]) { gx_device_perm_t * const dev = (gx_device_perm_t *)pdev; if (dev->permute) { frac y; out[5] = dev->mode == 0 ? out[3] : 0; out[4] = frac_0; y = out[2]; out[3] = out[1]; out[2] = out[0]; out[1] = out[0]; out[0] = y; } } private void gray_cs_to_perm_cm_0(gx_device *dev, frac gray, frac out[]) { out[0] = out[1] = out[2] = frac_0; out[3] = frac_1 - gray; perm_permute_cm(dev, out); } private void rgb_cs_to_perm_cm_0(gx_device *dev, const gs_imager_state *pis, frac r, frac g, frac b, frac out[]) { color_rgb_to_cmyk(r, g, b, pis, out); perm_permute_cm(dev, out); } private void cmyk_cs_to_perm_cm_0(gx_device *dev, frac c, frac m, frac y, frac k, frac out[]) { out[0] = c; out[1] = m; out[2] = y; out[3] = k; perm_permute_cm(dev, out); }; private void gray_cs_to_perm_cm_1(gx_device *dev, frac gray, frac out[]) { out[0] = out[1] = out[2] = frac_1 - gray; perm_permute_cm(dev, out); } private void rgb_cs_to_perm_cm_1(gx_device *dev, const gs_imager_state *pis, frac r, frac g, frac b, frac out[]) { out[0] = frac_1 - r; out[1] = frac_1 - g; out[2] = frac_1 - b; perm_permute_cm(dev, out); } private void cmyk_cs_to_perm_cm_1(gx_device *dev, frac c, frac m, frac y, frac k, frac out[]) { color_cmyk_to_rgb(c, m, y, k, NULL, out); out[0] = frac_1 - out[0]; out[1] = frac_1 - out[1]; out[2] = frac_1 - out[2]; perm_permute_cm(dev, out); }; private const gx_cm_color_map_procs perm_cmapping_procs_0 = { gray_cs_to_perm_cm_0, rgb_cs_to_perm_cm_0, cmyk_cs_to_perm_cm_0 }; private const gx_cm_color_map_procs perm_cmapping_procs_1 = { gray_cs_to_perm_cm_1, rgb_cs_to_perm_cm_1, cmyk_cs_to_perm_cm_1 }; private const gx_cm_color_map_procs *perm_cmapping_procs[] = { &perm_cmapping_procs_0, &perm_cmapping_procs_1 }; private const gx_cm_color_map_procs * perm_get_color_mapping_procs(const gx_device *dev) { const gx_device_perm_t * const pdev = (const gx_device_perm_t *)dev; if (pdev->mode < 0 || pdev->mode >= sizeof(perm_cmapping_procs) / sizeof(perm_cmapping_procs[0])) return NULL; return perm_cmapping_procs[pdev->mode]; } #define compare_color_names(name, name_size, str, str_size) \ (name_size == str_size && \ (strncmp((const char *)name, (const char *)str, name_size) == 0)) private int perm_get_color_comp_index(const gx_device *pdev, const char *pname, int name_size, int component_type) { const gx_device_perm_t * const dev = (const gx_device_perm_t *)pdev; int n_separation_names = dev->num_std_colorant_names; int i; for (i = 0; i < n_separation_names; i++) { const char *sep_name = dev->std_colorant_names[i]; if (compare_color_names(pname, name_size, sep_name, strlen(sep_name))) return i; } return -1; } /* Note: the encode and decode procs are entirely standard. The permutation is all done in the color space to color model mapping. In fact, we could probably just use the default here. */ /* * Encode a list of colorant values into a gx_color_index_value. */ private gx_color_index perm_encode_color(gx_device *dev, const gx_color_value colors[]) { int bpc = 8; int drop = sizeof(gx_color_value) * 8 - bpc; gx_color_index color = 0; int i = 0; int ncomp = dev->color_info.num_components; for (; i> drop); } return (color == gx_no_color_index ? color ^ 1 : color); } /* * Decode a gx_color_index value back to a list of colorant values. */ private int perm_decode_color(gx_device *dev, gx_color_index color, gx_color_value *out) { int bpc = 8; int drop = sizeof(gx_color_value) * 8 - bpc; int mask = (1 << bpc) - 1; int i = 0; int ncomp = dev->color_info.num_components; for (; i>= bpc; } return 0; } #define set_param_array(a, d, s)\ (a.data = d, a.size = s, a.persistent = false); private int perm_get_params(gx_device *pdev, gs_param_list *plist) { gx_device_perm_t * const dev = (gx_device_perm_t *)pdev; int code; code = param_write_int(plist, "Permute", &dev->permute); if (code >= 0) code = param_write_int(plist, "Mode", &dev->mode); /* * We need to specify the SeparationColorNames if we are permuting the colors. */ if (code >= 0 && dev->permute == 1) { int i; /* Temp variables. The data is copied into the plist below. */ gs_param_string_array scna; gs_param_string scn[6]; set_param_array(scna, scn, dev->num_std_colorant_names); /* Place colorant names into string array elements */ for (i = 0; i < dev->num_std_colorant_names; i++) param_string_from_string(scn[i], dev->std_colorant_names[i]); /* * Place the name array in the plist. This includes allocating * memory for the name array element and the actual string array. */ code = param_write_name_array(plist, "SeparationColorNames", &scna); } if (code >= 0) code = gdev_prn_get_params(pdev, plist); return code; } #undef set_param_array private const char * DeviceCMYKComponents[] = { "Cyan", "Magenta", "Yellow", "Black", 0 /* List terminator */ }; private const char * DeviceCMYComponents[] = { "Cyan", "Magenta", "Yellow", 0 /* List terminator */ }; private const char * DeviceNComponents[] = { "Yellow", "Cyan", "Cyan2", "Magenta", "Zero", "Black", 0 /* List terminator */ }; private int perm_set_color_model(gx_device_perm_t *dev, int mode, int permute) { dev->mode = mode; dev->permute = permute; if (mode == 0 && permute == 0) { dev->std_colorant_names = DeviceCMYKComponents; dev->num_std_colorant_names = 4; dev->color_info.cm_name = "DeviceCMYK"; dev->color_info.polarity = GX_CINFO_POLARITY_SUBTRACTIVE; } else if (mode == 0 && permute == 1) { dev->std_colorant_names = DeviceNComponents; dev->num_std_colorant_names = 6; dev->color_info.cm_name = "DeviceN"; dev->color_info.polarity = GX_CINFO_POLARITY_SUBTRACTIVE; } else if (mode == 1 && permute == 0) { dev->std_colorant_names = DeviceCMYComponents; dev->num_std_colorant_names = 3; dev->color_info.cm_name = "DeviceCMY"; dev->color_info.polarity = GX_CINFO_POLARITY_SUBTRACTIVE; } else if (mode == 1 && permute == 1) { dev->std_colorant_names = DeviceNComponents; dev->num_std_colorant_names = 6; dev->color_info.cm_name = "DeviceN"; dev->color_info.polarity = GX_CINFO_POLARITY_SUBTRACTIVE; } else { return -1; } dev->color_info.num_components = dev->num_std_colorant_names; dev->color_info.depth = 8 * dev->num_std_colorant_names; return 0; } private int perm_put_params(gx_device *pdev, gs_param_list *plist) { gx_device_perm_t * const dev = (gx_device_perm_t *)pdev; gx_device_color_info save_info; int code; int new_permute = dev->permute; int new_mode = dev->mode; code = param_read_int(plist, "Permute", &new_permute); if (code < 0) return code; code = param_read_int(plist, "Mode", &new_mode); if (code < 0) return code; if (new_mode < 0 || new_mode >= sizeof(perm_cmapping_procs) / sizeof(perm_cmapping_procs[0])) { dlprintf("rangecheck!\n"); return_error(gs_error_rangecheck); } dev->permute = new_permute; dev->mode = new_mode; save_info = pdev->color_info; code = perm_set_color_model(dev, dev->mode, dev->permute); if (code >= 0) code = gdev_prn_put_params(pdev, plist); if (code < 0) pdev->color_info = save_info; return code; }