/* Copyright (C) 1998, 1999 Aladdin Enterprises.  All rights reserved.
  
  This software is provided AS-IS with no warranty, either express or
  implied.
  
  This software is distributed under license and may not be copied,
  modified or distributed except as expressly authorized under the terms
  of the license contained in the file LICENSE in this distribution.
  
  For more information about licensing, please refer to
  http://www.ghostscript.com/licensing/. For information on
  commercial licensing, go to http://www.artifex.com/licensing/ or
  contact Artifex Software, Inc., 101 Lucas Valley Road #110,
  San Rafael, CA  94903, U.S.A., +1(415)492-9861.
*/

/* $Id: gxp1fill.c,v 1.6 2004/08/05 20:15:09 stefan Exp $ */
/* PatternType 1 filling algorithms */
#include "math_.h"
#include "gx.h"
#include "gserrors.h"
#include "gsrop.h"
#include "gsmatrix.h"
#include "gxcspace.h"		/* for gscolor2.h */
#include "gxcolor2.h"
#include "gxdcolor.h"
#include "gxdevcli.h"
#include "gxdevmem.h"
#include "gxclip2.h"
#include "gxpcolor.h"
#include "gxp1impl.h"

/* Define the state for tile filling. */
typedef struct tile_fill_state_s {

    /* Original arguments */

    const gx_device_color *pdevc;	/* pattern color */
    int x0, y0, w0, h0;
    gs_logical_operation_t lop;
    const gx_rop_source_t *source;

    /* Variables set at initialization */

    gx_device_tile_clip cdev;
    gx_device *pcdev;		/* original device or &cdev */
    const gx_strip_bitmap *tmask;
    gs_int_point phase;

    /* Following are only for uncolored patterns */

    dev_color_proc_fill_rectangle((*fill_rectangle));

    /* Following are only for colored patterns */

    const gx_rop_source_t *rop_source;
    gx_device *orig_dev;
    int xoff, yoff;		/* set dynamically */

} tile_fill_state_t;

/* Initialize the filling state. */
private int
tile_fill_init(tile_fill_state_t * ptfs, const gx_device_color * pdevc,
	       gx_device * dev, bool set_mask_phase)
{
    gx_color_tile *m_tile = pdevc->mask.m_tile;
    int px, py;

    ptfs->pdevc = pdevc;
    if (m_tile == 0) {		/* no clipping */
	ptfs->pcdev = dev;
	ptfs->phase = pdevc->phase;
	return 0;
    }
    ptfs->pcdev = (gx_device *) & ptfs->cdev;
    ptfs->tmask = &m_tile->tmask;
    ptfs->phase.x = pdevc->mask.m_phase.x;
    ptfs->phase.y = pdevc->mask.m_phase.y;
    /*
     * For non-simple tiles, the phase will be reset on each pass of the
     * tile_by_steps loop, but for simple tiles, we must set it now.
     */
    if (set_mask_phase && m_tile->is_simple) {
	px = imod(-(int)(m_tile->step_matrix.tx - ptfs->phase.x + 0.5),
		  m_tile->tmask.rep_width);
	py = imod(-(int)(m_tile->step_matrix.ty - ptfs->phase.y + 0.5),
		  m_tile->tmask.rep_height);
    } else
	px = py = 0;
    return tile_clip_initialize(&ptfs->cdev, ptfs->tmask, dev, px, py, dev->memory); 
    /* leak ? was NULL memoryptr */
}

/*
 * Fill with non-standard X and Y stepping.
 * ptile is pdevc->colors.pattern.{m,p}_tile.
 * tbits_or_tmask is whichever of tbits and tmask is supplying
 * the tile size.
 * This implementation could be sped up considerably!
 */
private int
tile_by_steps(tile_fill_state_t * ptfs, int x0, int y0, int w0, int h0,
	      const gx_color_tile * ptile,
	      const gx_strip_bitmap * tbits_or_tmask,
	      int (*fill_proc) (const tile_fill_state_t * ptfs,
				int x, int y, int w, int h))
{
    int x1 = x0 + w0, y1 = y0 + h0;
    int i0, i1, j0, j1, i, j;
    gs_matrix step_matrix;	/* translated by phase */
    int code;

    ptfs->x0 = x0, ptfs->w0 = w0;
    ptfs->y0 = y0, ptfs->h0 = h0;
    step_matrix = ptile->step_matrix;
    step_matrix.tx -= ptfs->phase.x;
    step_matrix.ty -= ptfs->phase.y;
    {
	gs_rect bbox;		/* bounding box in device space */
	gs_rect ibbox;		/* bounding box in stepping space */
	double bbw = ptile->bbox.q.x - ptile->bbox.p.x;
	double bbh = ptile->bbox.q.y - ptile->bbox.p.y;
	double u0, v0, u1, v1;

	bbox.p.x = x0, bbox.p.y = y0;
	bbox.q.x = x1, bbox.q.y = y1;
	gs_bbox_transform_inverse(&bbox, &step_matrix, &ibbox);
	if_debug10('T',
	  "[T]x,y=(%d,%d) w,h=(%d,%d) => (%g,%g),(%g,%g), offset=(%g,%g)\n",
		   x0, y0, w0, h0,
		   ibbox.p.x, ibbox.p.y, ibbox.q.x, ibbox.q.y,
		   step_matrix.tx, step_matrix.ty);
	/*
	 * If the pattern is partly transparent and XStep/YStep is smaller
	 * than the device space BBox, we need to ensure that we cover
	 * each pixel of the rectangle being filled with *every* pattern
	 * that overlaps it, not just *some* pattern copy.
	 */
	u0 = ibbox.p.x - max(ptile->bbox.p.x, 0) - 0.000001;
	v0 = ibbox.p.y - max(ptile->bbox.p.y, 0) - 0.000001;
	u1 = ibbox.q.x - min(ptile->bbox.q.x, 0) + 0.000001;
	v1 = ibbox.q.y - min(ptile->bbox.q.y, 0) + 0.000001;
	if (!ptile->is_simple)
	    u0 -= bbw, v0 -= bbh, u1 += bbw, v1 += bbh;
	i0 = (int)floor(u0);
	j0 = (int)floor(v0);
	i1 = (int)ceil(u1);
	j1 = (int)ceil(v1);
    }
    if_debug4('T', "[T]i=(%d,%d) j=(%d,%d)\n", i0, i1, j0, j1);
    for (i = i0; i < i1; i++)
	for (j = j0; j < j1; j++) {
	    int x = (int)(step_matrix.xx * i +
			  step_matrix.yx * j + step_matrix.tx);
	    int y = (int)(step_matrix.xy * i +
			  step_matrix.yy * j + step_matrix.ty);
	    int w = tbits_or_tmask->size.x;
	    int h = tbits_or_tmask->size.y;
	    int xoff, yoff;

	    if_debug4('T', "[T]i=%d j=%d x,y=(%d,%d)", i, j, x, y);
	    if (x < x0)
		xoff = x0 - x, x = x0, w -= xoff;
	    else
		xoff = 0;
	    if (y < y0)
		yoff = y0 - y, y = y0, h -= yoff;
	    else
		yoff = 0;
	    if (x + w > x1)
		w = x1 - x;
	    if (y + h > y1)
		h = y1 - y;
	    if_debug6('T', "=>(%d,%d) w,h=(%d,%d) x/yoff=(%d,%d)\n",
		      x, y, w, h, xoff, yoff);
	    if (w > 0 && h > 0) {
		if (ptfs->pcdev == (gx_device *) & ptfs->cdev)
		    tile_clip_set_phase(&ptfs->cdev,
				imod(xoff - x, ptfs->tmask->rep_width),
				imod(yoff - y, ptfs->tmask->rep_height));
		/* Set the offsets for colored pattern fills */
		ptfs->xoff = xoff;
		ptfs->yoff = yoff;
		code = (*fill_proc) (ptfs, x, y, w, h);
		if (code < 0)
		    return code;
	    }
	}
    return 0;
}

/* Fill a rectangle with a colored Pattern. */
/* Note that we treat this as "texture" for RasterOp. */
private int
tile_colored_fill(const tile_fill_state_t * ptfs,
		  int x, int y, int w, int h)
{
    gx_color_tile *ptile = ptfs->pdevc->colors.pattern.p_tile;
    gs_logical_operation_t lop = ptfs->lop;
    const gx_rop_source_t *source = ptfs->source;
    const gx_rop_source_t *rop_source = ptfs->rop_source;
    gx_device *dev = ptfs->orig_dev;
    int xoff = ptfs->xoff, yoff = ptfs->yoff;
    gx_strip_bitmap *bits = &ptile->tbits;
    const byte *data = bits->data;
    bool full_transfer = (w == ptfs->w0 && h == ptfs->h0);
    gx_bitmap_id source_id =
    (full_transfer ? rop_source->id : gx_no_bitmap_id);
    int code;

    if (source == NULL && lop_no_S_is_T(lop))
	code = (*dev_proc(ptfs->pcdev, copy_color))
	    (ptfs->pcdev, data + bits->raster * yoff, xoff,
	     bits->raster,
	     (full_transfer ? bits->id : gx_no_bitmap_id),
	     x, y, w, h);
    else {
	gx_strip_bitmap data_tile;

	data_tile.data = (byte *) data;		/* actually const */
	data_tile.raster = bits->raster;
	data_tile.size.x = data_tile.rep_width = ptile->tbits.size.x;
	data_tile.size.y = data_tile.rep_height = ptile->tbits.size.y;
	data_tile.id = bits->id;
	data_tile.shift = data_tile.rep_shift = 0;
	code = (*dev_proc(dev, strip_copy_rop))
	    (dev,
	     rop_source->sdata + (y - ptfs->y0) * rop_source->sraster,
	     rop_source->sourcex + (x - ptfs->x0),
	     rop_source->sraster, source_id,
	     (rop_source->use_scolors ? rop_source->scolors : NULL),
	     &data_tile, NULL,
	     x, y, w, h,
	     imod(xoff - x, data_tile.rep_width),
	     imod(yoff - y, data_tile.rep_height),
	     lop);
    }
    return code;
}
int
gx_dc_pattern_fill_rectangle(const gx_device_color * pdevc, int x, int y,
			     int w, int h, gx_device * dev,
			     gs_logical_operation_t lop,
			     const gx_rop_source_t * source)
{
    gx_color_tile *ptile = pdevc->colors.pattern.p_tile;
    const gx_rop_source_t *rop_source = source;
    gx_rop_source_t no_source;
    gx_strip_bitmap *bits;
    tile_fill_state_t state;
    int code;

    if (ptile == 0)		/* null pattern */
	return 0;
    if (rop_source == NULL)
	set_rop_no_source(rop_source, no_source, dev);
    bits = &ptile->tbits;
    code = tile_fill_init(&state, pdevc, dev, false);
    if (code < 0)
	return code;
    if (ptile->is_simple) {
	int px =
	    imod(-(int)(ptile->step_matrix.tx - state.phase.x + 0.5),
		 bits->rep_width);
	int py =
	    imod(-(int)(ptile->step_matrix.ty - state.phase.y + 0.5),
		 bits->rep_height);

	if (state.pcdev != dev)
	    tile_clip_set_phase(&state.cdev, px, py);
	if (source == NULL && lop_no_S_is_T(lop))
	    code = (*dev_proc(state.pcdev, strip_tile_rectangle))
		(state.pcdev, bits, x, y, w, h,
		 gx_no_color_index, gx_no_color_index, px, py);
	else
	    code = (*dev_proc(state.pcdev, strip_copy_rop))
		(state.pcdev,
		 rop_source->sdata, rop_source->sourcex,
		 rop_source->sraster, rop_source->id,
		 (rop_source->use_scolors ? rop_source->scolors : NULL),
		 bits, NULL, x, y, w, h, px, py, lop);
    } else {
	state.lop = lop;
	state.source = source;
	state.rop_source = rop_source;
	state.orig_dev = dev;
	code = tile_by_steps(&state, x, y, w, h, ptile,
			     &ptile->tbits, tile_colored_fill);
    }
    return code;
}

/* Fill a rectangle with an uncolored Pattern. */
/* Note that we treat this as "texture" for RasterOp. */
private int
tile_masked_fill(const tile_fill_state_t * ptfs,
		 int x, int y, int w, int h)
{
    if (ptfs->source == NULL)
	return (*ptfs->fill_rectangle)
	    (ptfs->pdevc, x, y, w, h, ptfs->pcdev, ptfs->lop, NULL);
    else {
	const gx_rop_source_t *source = ptfs->source;
	gx_rop_source_t step_source;

	step_source.sdata = source->sdata + (y - ptfs->y0) * source->sraster;
	step_source.sourcex = source->sourcex + (x - ptfs->x0);
	step_source.sraster = source->sraster;
	step_source.id = (w == ptfs->w0 && h == ptfs->h0 ?
			  source->id : gx_no_bitmap_id);
	step_source.scolors[0] = source->scolors[0];
	step_source.scolors[1] = source->scolors[1];
	step_source.use_scolors = source->use_scolors;
	return (*ptfs->fill_rectangle)
	    (ptfs->pdevc, x, y, w, h, ptfs->pcdev, ptfs->lop, &step_source);
    }
}
int
gx_dc_pure_masked_fill_rect(const gx_device_color * pdevc,
			    int x, int y, int w, int h, gx_device * dev,
			    gs_logical_operation_t lop,
			    const gx_rop_source_t * source)
{
    gx_color_tile *ptile = pdevc->mask.m_tile;
    tile_fill_state_t state;
    int code;

    /*
     * This routine should never be called if there is no masking,
     * but we leave the checks below just in case.
     */
    code = tile_fill_init(&state, pdevc, dev, true);
    if (code < 0)
	return code;
    if (state.pcdev == dev || ptile->is_simple)
	return (*gx_dc_type_data_pure.fill_rectangle)
	    (pdevc, x, y, w, h, state.pcdev, lop, source);
    else {
	state.lop = lop;
	state.source = source;
	state.fill_rectangle = gx_dc_type_data_pure.fill_rectangle;
	return tile_by_steps(&state, x, y, w, h, ptile, &ptile->tmask,
			     tile_masked_fill);
    }
}
int
gx_dc_binary_masked_fill_rect(const gx_device_color * pdevc,
			      int x, int y, int w, int h, gx_device * dev,
			      gs_logical_operation_t lop,
			      const gx_rop_source_t * source)
{
    gx_color_tile *ptile = pdevc->mask.m_tile;
    tile_fill_state_t state;
    int code;

    code = tile_fill_init(&state, pdevc, dev, true);
    if (code < 0)
	return code;
    if (state.pcdev == dev || ptile->is_simple)
	return (*gx_dc_type_data_ht_binary.fill_rectangle)
	    (pdevc, x, y, w, h, state.pcdev, lop, source);
    else {
	state.lop = lop;
	state.source = source;
	state.fill_rectangle = gx_dc_type_data_ht_binary.fill_rectangle;
	return tile_by_steps(&state, x, y, w, h, ptile, &ptile->tmask,
			     tile_masked_fill);
    }
}
int
gx_dc_colored_masked_fill_rect(const gx_device_color * pdevc,
			       int x, int y, int w, int h, gx_device * dev,
			       gs_logical_operation_t lop,
			       const gx_rop_source_t * source)
{
    gx_color_tile *ptile = pdevc->mask.m_tile;
    tile_fill_state_t state;
    int code;

    code = tile_fill_init(&state, pdevc, dev, true);
    if (code < 0)
	return code;
    if (state.pcdev == dev || ptile->is_simple)
	return (*gx_dc_type_data_ht_colored.fill_rectangle)
	    (pdevc, x, y, w, h, state.pcdev, lop, source);
    else {
	state.lop = lop;
	state.source = source;
	state.fill_rectangle = gx_dc_type_data_ht_colored.fill_rectangle;
	return tile_by_steps(&state, x, y, w, h, ptile, &ptile->tmask,
			     tile_masked_fill);
    }
}