# Copyright (C) 1997-2002 artofcode LLC. All rights reserved. # # This software is provided AS-IS with no warranty, either express or # implied. # # This software is distributed under license and may not be copied, # modified or distributed except as expressly authorized under the terms # of the license contained in the file LICENSE in this distribution. # # For more information about licensing, please refer to # http://www.ghostscript.com/licensing/. For information on # commercial licensing, go to http://www.artifex.com/licensing/ or # contact Artifex Software, Inc., 101 Lucas Valley Road #110, # San Rafael, CA 94903, U.S.A., +1(415)492-9861. # $Id: openvms.mak,v 1.41 2005/08/31 05:52:32 ray Exp $ # makefile for OpenVMS VAX and Alpha # # Please contact Jim Dunham (dunham@omtool.com) if you have questions. # Support for VAX C on OpenVMS was removed in release 6.01 by Aladdin: # DEC C is now used on both VAX and Alpha platforms. # # ------------------------------- Options ------------------------------- # ###### This section is the only part of the file you should need to edit. # on the make command line specify: # make -fopenvms.mak "OPENVMS={VAX,ALPHA}" "DECWINDOWS={1.2,}" # Define the directory for the final executable, and the # source, generated intermediate file, and object directories # for the graphics library (GL) and the PostScript/PDF interpreter (PS). # NOTE: If you use GNU make, GLGENDIR and PSGENDIR must not be the # current directory ([]). BINDIR=[.bin] GLSRCDIR=[.src] GLGENDIR=[.obj] GLOBJDIR=[.obj] PSSRCDIR=[.src] PSLIBDIR=[.lib] PSGENDIR=[.obj] PSOBJDIR=[.obj] # Because of OpenVMS syntactic problems, the following redundant definitions # are necessary. If you are using more than one GENDIR and/or OBJDIR, # you will have to edit the code below that creates these directories. BIN_DIR=BIN.DIR OBJ_DIR=OBJ.DIR # Do not edit the next group of lines. #include $(COMMONDIR)/vmscdefs.mak #include $(COMMONDIR)/vmsdefs.mak #include $(COMMONDIR)/generic.mak include $(GLSRCDIR)version.mak DD=$(GLGENDIR) GLD=$(GLGENDIR) PSD=$(PSGENDIR) # ------ Generic options ------ # # Define the directory that will hold documentation at runtime. GS_DOCDIR=GS_DOC #GS_DOCDIR=SYS$COMMON:[GS] # Define the default directory/ies for the runtime # initialization and font files. Separate multiple directories with ,. GS_LIB_DEFAULT=GS_ROOT:[LIB],GS_ROOT:[RESOURCE],GS_ROOT:[FONT] # Define whether or not searching for initialization files should always # look in the current directory first. This leads to well-known security # and confusion problems, but users insist on it. # NOTE: this also affects searching for files named on the command line: # see the "File searching" section of Use.htm for full details. # Because of this, setting SEARCH_HERE_FIRST to 0 is not recommended. SEARCH_HERE_FIRST=1 # Define the name of the interpreter initialization file. # (There is no reason to change this.) GS_INIT=GS_INIT.PS # Choose generic configuration options. # Setting DEBUG=1 includes debugging features in the code DEBUG= # Setting TDEBUG=1 includes symbol table information for the debugger, # and also enables stack tracing on failure. TDEBUG= # Setting CDEBUG=1 enables 'C' compiler debugging and turns off optimization # Code is substantially slower and larger. CDEBUG= # Define the name of the executable file. GS=GS # Define the name of a pre-built executable that can be invoked at build # time. Currently, this is only needed for compiled fonts. The usual # alternatives are: # - the standard name of Ghostscript on your system (typically `gs'): BUILD_TIME_GS=GS # - the name of the executable you are building now. If you choose this # option, then you must build the executable first without compiled fonts, # and then again with compiled fonts. #BUILD_TIME_GS=$(BINDIR)$(GS) -I$(PSLIBDIR) # Define the directory where the IJG JPEG library sources are stored, # and the major version of the library that is stored there. # You may need to change this if the IJG library version changes. # See jpeg.mak for more information. JSRCDIR=[.jpeg-6b] JVERSION=6 # Define the directory where the PNG library sources are stored, # and the version of the library that is stored there. # You may need to change this if the libpng version changes. # See libpng.mak for more information. PSRCDIR=[.libpng-1_2_8] PVERSION=10208 # Define the directory where the zlib sources are stored. # See zlib.mak for more information. ZSRCDIR=[.zlib-1_2_1] # Define the jbig2dec library source location. # See jbig2.mak for more information. JBIG2SRCDIR=[.jbig2dec-0_7] # Define the directory where the icclib source are stored. # See icclib.mak for more information ICCSRCDIR=[.icclib] # IJS has not been ported to OpenVMS. If you do the port, # you'll need to set these values. You'll also need to # include the ijs.mak makefile (right after icclib.mak). # # Define the directory where the ijs source is stored, # and the process forking method to use for the server. # See ijs.mak for more information. #IJSSRCDIR=[.ijs] #IJSEXECTYPE=unix # Note that built-in third-party libraries aren't available. SHARE_JPEG=0 SHARE_LIBPNG=0 SHARE_ZLIB=0 SHARE_JBIG2=0 # Define the path to X11 include files X_INCLUDE=DECW$$INCLUDE # ------ Platform-specific options ------ # # Define the drive, directory, and compiler name for the 'C' compiler. # COMP is the full compiler path name. COMP=CC ifdef DEBUG COMP:=$(COMP)/DEBUG/NOOPTIMIZE else # This should include /OPTIMIZE, but some OpenVMS compilers have an # optimizer bug that causes them to generate incorrect code for gdevpsfx.c, # so we must disable optimization. (Eventually we will check for the bug # in genarch and enable optimization if it is safe.) #COMP:=$(COMP)/NODEBUG/OPTIMIZE COMP:=$(COMP)/NODEBUG/NOOPTIMIZE endif COMP:=$(COMP)/DECC/PREFIX=ALL/NESTED_INCLUDE=PRIMARY/NAMES=SHORTENED # Define any other compilation flags. # Including defines for A4 paper size ifdef A4_PAPER COMP:=$(COMP)/DEFINE=("A4") endif # LINK is the full linker path name ifdef TDEBUG LINKER=LINK/DEBUG/TRACEBACK else LINKER=LINK/NODEBUG/NOTRACEBACK endif # INCDIR contains the include files INCDIR= # LIBDIR contains the library files LIBDIR= # Define the .dev module that implements thread and synchronization # primitives for this platform. Don't change this unless you really know # what you're doing. SYNC=posync # ------ Devices and features ------ # # Choose the device(s) to include. See devs.mak for details, # devs.mak and contrib.mak for the list of available devices. DEVICE_DEVS=$(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev DEVICE_DEVS1= DEVICE_DEVS2= DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev DEVICE_DEVS5=$(DD)uniprint.dev DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiffsep.dev DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev $(DD)pngalpha.dev DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev $(DD)jpegcmyk.dev DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)ps2write.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev DEVICE_DEVS16=$(DD)bbox.dev # Overflow from DEVS9 DEVICE_DEVS17=$(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev DEVICE_DEVS18= DEVICE_DEVS19= DEVICE_DEVS20= DEVICE_DEVS21= # Choose the language feature(s) to include. See gs.mak for details. FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)epsf.dev $(PSD)fapi.dev # Choose whether to compile the .ps initialization files into the executable. # See gs.mak for details. COMPILE_INITS=0 # Choose whether to store band lists on files or in memory. # The choices are 'file' or 'memory'. BAND_LIST_STORAGE=file # Choose which compression method to use when storing band lists in memory. # The choices are 'lzw' or 'zlib'. BAND_LIST_COMPRESSOR=zlib # Choose the implementation of file I/O: 'stdio', 'fd', or 'both'. # See gs.mak and sfxfd.c for more details. FILE_IMPLEMENTATION=stdio # Choose the implementation of stdio: '' for file I/O and 'c' for callouts # See gs.mak and ziodevs.c/ziodevsc.c for more details. STDIO_IMPLEMENTATION=c # Define the name table capacity size of 2^(16+n). EXTEND_NAMES=0 # Define whether the system constants are writable. SYSTEM_CONSTANTS_ARE_WRITABLE=0 # Define the platform name. PLATFORM=openvms_ # Define the name of the makefile -- used in dependencies. MAKEFILE=$(GLSRCDIR)openvms.mak TOP_MAKEFILES=$(MAKEFILE) # Define the platform options PLATOPT= # Patch a couple of PC-specific things that aren't relevant to OpenVMS builds, # but that cause `make' to produce warnings. PCFBASM= # It is very unlikely that anyone would want to edit the remaining # symbols, but we describe them here for completeness: # Define the suffix for command files (e.g., null or .bat). CMD= # Define the directory separator character (\ for MS-DOS, / for Unix, # nothing for OpenVMS). D= # Define the brackets for passing preprocessor definitions to the C compiler. NULL= D_=/DEFINE=" _D_=$(NULL)= _D=" # Define the syntax of search paths for the C compiler. # The OpenVMS compilers uses /INCLUDE=(dir1, dir2, ...dirn), # and only a single /INCLUDE switch is allowed in the command line. I_=/INCLUDE=( II=, _I=) # Define the string for specifying the output file from the C compiler. O_=/OBJECT= # Define the quoting string for mixed-case arguments. # (OpenVMS is the only platform where this isn't an empty string.) Q=" # Define the extension for executable files (e.g., null or .exe). XE=.exe # Define the extension for executable files for the auxiliary programs # (e.g., null or .exe). XEAUX=.exe # Define the list of files that `make clean' removes. BEGINFILES=$(GLGENDIR)OPENVMS.OPT $(GLGENDIR)OPENVMS.COM # Define the C invocation for auxiliary programs (echogs, genarch). CCAUX=CC/DECC # Define the C invocation for normal compilation. CC=$(COMP) # Define the Link invocation. LINK=$(LINKER)/EXE=$@ $^,$(GLGENDIR)OPENVMS.OPT/OPTION # Define the auxiliary program dependency. We don't need this. AK= # Define the syntax for command, object, and executable files. OBJ=obj # Define the prefix for image invocations. EXP=MCR $(NULL) # Define the prefix for shell invocations. SH= # Define generic commands. CP_=$$ @$(GLSRCDIR)COPY_ONE # Define the command for deleting (a) file(s) (including wild cards) RM_=$$ @$(GLSRCDIR)RM_ONE # Define the command for deleting multiple files / patterns. RMN_=$$ @$(GLSRCDIR)RM_ALL # Define the arguments for genconf. CONFILES=-p %s CONFLDTR=-o # Define the generic compilation rules. ..suffixes: .c .obj .exe ..obj.exe: $(LINK) # ---------------------------- End of options ---------------------------- # # Define the default build rule, so the object directories get created # automatically. # I wasn't able to find a "do nothing" command in the DCL manual! std: STDDIRS default WRITE SYS$$OUTPUT "Done." STDDIRS: $$ If F$$Search("$(BIN_DIR)") .EQS. "" Then Create/Directory/Log $(BINDIR) $$ If F$$Search("$(OBJ_DIR)") .EQS. "" Then Create/Directory/Log $(GLOBJDIR) # ------------------- Include the generic makefiles ---------------------- # #include $(COMMONDIR)/ansidefs.mak #include $(COMMONDIR)/vmsdefs.mak #include $(COMMONDIR)/generic.mak include $(GLSRCDIR)gs.mak include $(GLSRCDIR)lib.mak include $(PSSRCDIR)int.mak include $(PSSRCDIR)cfonts.mak include $(GLSRCDIR)jpeg.mak # zlib.mak must precede libpng.mak include $(GLSRCDIR)zlib.mak include $(GLSRCDIR)libpng.mak include $(GLSRCDIR)jbig2.mak include $(GLSRCDIR)icclib.mak include $(GLSRCDIR)devs.mak include $(GLSRCDIR)contrib.mak # Define various incantations of the 'c' compiler. CC_=$(COMP) CC_INT=$(CC_) CC_NO_WARN=$(CC_) # ----------------------------- Main program ------------------------------ # $(GS_XE) : openvms $(GLOBJDIR)gs.$(OBJ) $(INT_ALL) $(LIB_ALL) $(LINKER)/EXE=$@ $(GLOBJ)gs.$(OBJ),$(ld_tr)/OPTIONS,$(GLGENDIR)OPENVMS.OPT/OPTION # OpenVMS.dev openvms__=$(GLOBJ)gp_getnv.$(OBJ) $(GLOBJ)gp_vms.$(OBJ) $(GLOBJ)gp_stdia.$(OBJ) $(GLGEN)openvms_.dev : $(openvms__) $(GLGEN)nosync.dev $(SETMOD) $(GLGEN)openvms_ $(openvms__) -include $(GLGEN)nosync $(GLOBJ)gp_vms.$(OBJ) : $(GLSRC)gp_vms.c $(string__h) $(memory__h) $(gx_h) $(gp_h) $(gpmisc_h) $(gsstruct_h) $(CC_)/include=($(GLGENDIR),$(GLSRCDIR))/obj=$(GLOBJ)gp_vms.$(OBJ) $(GLSRC)gp_vms.c $(GLOBJ)gp_stdia.$(OBJ): $(GLSRC)gp_stdia.c $(AK) $(stdio__h) $(time__h) $(unistd__h) $(gx_h) $(gp_h) $(CC_)/obj=$(GLOBJ)gp_stdia.$(OBJ) $(GLSRC)gp_stdia.c # Interpreter AUX programs $(ECHOGS_XE) : $(GLOBJ)echogs.$(OBJ) LINK/EXE=$@ $(GLOBJ)echogs.$(OBJ) $(GLOBJ)echogs.$(OBJ) : $(GLSRC)echogs.c $(CCAUX)/obj=$(GLOBJ)echogs.$(OBJ) $(GLSRC)echogs.c $(GENARCH_XE) : $(GLOBJ)genarch.$(OBJ) LINK/EXE=$@ $(GLOBJ)genarch.$(OBJ) $(GLOBJ)genarch.$(OBJ) : $(GLSRC)genarch.c $(GENARCH_DEPS) $(CCAUX)/obj=$(GLOBJ)genarch.$(OBJ) $(GLSRC)genarch.c $(GENCONF_XE) : $(GLOBJDIR)genconf.$(OBJ) LINK/EXE=$@ $(GLOBJ)genconf.$(OBJ) $(GLOBJ)genconf.$(OBJ) : $(GLSRC)genconf.c $(GENCONF_DEPS) $(CCAUX)/obj=$(GLOBJ)genconf.$(OBJ) $(GLSRC)genconf.c $(GENDEV_XE) : $(GLOBJDIR)gendev.$(OBJ) LINK/EXE=$@ $(GLOBJ)gendev.$(OBJ) $(GLOBJ)gendev.$(OBJ) : $(GLSRC)gendev.c $(GENDEV_DEPS) $(CCAUX)/obj=$(GLOBJ)gendev.$(OBJ) $(GLSRC)gendev.c $(GENHT_XE) : $(GLOBJDIR)genht.$(OBJ) LINK/EXE=$@ $(GLOBJ)genht.$(OBJ) $(GLOBJ)genht.$(OBJ) : $(GLSRC)genht.c $(GENHT_DEPS) $(CCAUX)/obj=$(GLOBJ)genht.$(OBJ) $(GENHT_CFLAGS) $(GLSRC)genht.c $(GENINIT_XE) : $(GLOBJDIR)geninit.$(OBJ) LINK/EXE=$@ $(GLOBJ)geninit.$(OBJ) $(GLOBJ)geninit.$(OBJ) : $(GLSRC)geninit.c $(GENINIT_DEPS) $(CCAUX)/obj=$(GLOBJ)geninit.$(OBJ) $(GLSRC)geninit.c # Preliminary definitions openvms : $(GLGENDIR)openvms.com $(GLGENDIR)openvms.opt $$ @$(GLGENDIR)OPENVMS $(GLGENDIR)openvms.com : $(GLSRCDIR)append_l.com $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB X11 $(X_INCLUDE)" $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB GS_LIB ''F$$ENVIRONMENT(""DEFAULT"")'" $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB GS_DOC ''F$$ENVIRONMENT(""DEFAULT"")'" $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB DECC$$USER_INCLUDE ''F$$ENVIRONMENT(""DEFAULT"")', DECW$$INCLUDE, DECC$$LIBRARY_INCLUDE, SYS$$LIBRARY" $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB DECC$$SYSTEM_INCLUDE ''F$$ENVIRONMENT(""DEFAULT"")', DECW$$INCLUDE, DECC$$LIBRARY_INCLUDE, SYS$$LIBRARY" $$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB SYS "DECC$$LIBRARY_INCLUDE,SYS$$LIBRARY" $(GLGENDIR)openvms.opt: ifeq "$(DECWINDOWS)" "1.2" $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XMLIBSHR12.EXE/SHARE" $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XTLIBSHRR5.EXE/SHARE" $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XLIBSHR.EXE/SHARE" else $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XMLIBSHR.EXE/SHARE" $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XTSHR.EXE/SHARE" $$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XLIBSHR.EXE/SHARE" endif $$ @$(GLSRCDIR)APPEND_L $@ ""Ident="""""GS $(GS_DOT_VERSION)""""" # The platform-specific makefiles must also include rules for creating # certain dynamically generated files: # gconfig_.h - this indicates the presence or absence of # certain system header files that are located in different # places on different systems. (It could be generated by # the GNU `configure' program.) # gconfigv.h - this indicates the status of certain machine- # and configuration-specific features derived from definitions # in the platform-specific makefile. $(gconfig__h) : $(TOP_MAKEFILES) $(ECHOGS_XE) $(EXP)$(ECHOGS_XE) -w $(gconfig__h) -x 23 define "HAVE_SYS_TIME_H" $(gconfigv_h) : $(TOP_MAKEFILES) $(ECHOGS_XE) $(EXP)$(ECHOGS_XE) -w $(gconfigv_h) -x 23 define "USE_ASM" 0 $(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "USE_FPU" 1 $(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "EXTEND_NAMES" 0$(EXTEND_NAMES) $(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "SYSTEM_CONSTANTS_ARE_WRITABLE" 0$(SYSTEM_CONSTANTS_ARE_WRITABLE)